|
12-07-2018, 02:30 PM | #1 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
good chain adjustment
at the 49 second mark,,, he is talking about the inside lock nuts... I tell everyone to throw them away... remove adjusting eyebolts.. 1 at a time... throw the inside locknut away and this also lets you adjust the adjustor with out stripping it,,, see video .. and adjust your axle spread ( front to rear .. within 1/2 inch on both side... 1/2 deflection in chain
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
12-07-2018, 02:40 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
I did just that after I stripped the adjuster.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
12-07-2018, 03:27 PM | #3 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
locknut
yes I did not know why they put it on there and after about 5 years of selling them... I finally figured it.. that back one is for moving the axle forward.... it is better to throw it away.. and it you have to move it forward use 1inch ratcheting strap on front A arm and over the rear axle and use that to pull it forward( after you have all the nuts loose) .
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
|
|
|
|