|
![]() |
#1 |
Join Date: Nov 2023
Posts: 6
|
![]()
After buying a $20 carb when I first got my Rhino I ended up running into issues with fuel leaking out the overflow after several months. Tuning was a nightmare due to the screw locations and I was ready to replace with something higher quality.
I picked up a Mikuni VM26 based on recommendations on this forum. However when it arrived it doesn't seem to have a good way to mount it to the motor. The old carb was basically bolt in place, but this one doesn't seem to have any mounting plate. How do I get this connected to my Rhino? ![]() |
![]() |
![]() |
#2 |
Join Date: Nov 2023
Posts: 6
|
Do I need something like this?
https://www.ebay.com/itm/29655279123...ec5bf508afe1fb If anyone can post a link to the proper boot that would be super helpful. Thanks. |
![]() |
![]() |
#3 |
Join Date: Nov 2023
Posts: 6
|
I ended up ordering this one. Looks like even though it says VM24 the measurements for the bolts and the rubber opening match what I have. I'll update this thread with details after it arrives and I try installing it.
https://www.amazon.com/dp/B0CL1ZGXC3...fed_asin_title |
![]() |
|
![]() |
![]() |
Tags |
carb, mikuni, mounting, rhino, vm26 |
|
|