|
06-18-2018, 02:08 PM | #1 |
Join Date: Apr 2009
Posts: 114
|
I broke the chain tightening bolt
How would I go about repairing this. 2016 200 Denali/ Tmec
__________________
Much Rather be ridin |
|
06-18-2018, 02:54 PM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
I wonder if the Hawk/TT250 adjusters are the same dimensions? If you can measure the inside of the swing arm tube I can see if it matches my Hawk. If so, then you can order a set from CSC for the TT250. Unless somebody can provide a link to your specific part, it is at least an option.
This is each, so if you want two, make sure you set the quantity to 2. http://www.cscmotorcycles.com/TT250-...p/zt26-107.htm
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
06-18-2018, 09:55 PM | #4 |
Join Date: Oct 2015
Location: connecticut
Posts: 980
|
ok vet_stingray, what year is the chevy? I have 71 vette.
|
|
06-19-2018, 10:17 AM | #5 |
Join Date: Apr 2009
Posts: 114
|
Man I really need to change my user name I made that email when I was about 12 and I thought a corvette was the coolest car in the world I didnt realize till a few years later that I spelled vet wrong. But yeah I own no chevys but I do have a fleet of VWs
__________________
Much Rather be ridin |
|
06-19-2018, 10:22 AM | #6 |
Join Date: Apr 2009
Posts: 114
|
So I found this Parts listing to Denali 200 of course I the company doesnt actually sell the parts.
https://sunright.s3.amazonaws.com/im...7.15.2015_.pdf Have not had a chance to pull mine out to see check it against the TT250 one you posted but I may just order them and make um work. I bought my bike used I think I am going to find the guys number I bought it from and see where he got it and see if they can get parts. He bought it assembled somewhere here in GA.
__________________
Much Rather be ridin |
|
06-19-2018, 11:53 PM | #7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The pics could be deceiving, but it doesn't look like aluminum to me. Does a magnet stick to it?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
06-21-2018, 11:04 AM | #8 |
Join Date: Apr 2009
Posts: 114
|
Good observation I will check, I was mainly looking at how clean the tacks were. Ill check.
__________________
Much Rather be ridin |
|
06-21-2018, 01:39 PM | #9 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
You could probably use a rotary tool and cut the tack weld and just replace the bolt. If you don't have a welder you could just use a nut with a lock washer and tighten it in place.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|