|
08-05-2013, 05:01 PM | #1 |
Join Date: Jul 2013
Location: FLorida
Posts: 10
|
2006 Vento 200c Parts?
I recently purchased this bike. I am happy with it so far although it has randomly stalled on me a few times. I know the intake manifold needs to replaced there was a crack in it which I epoxied but not sure how well or how long it will work. I need to find some front brake pads and a couple of the plastic ferrings for the bike. Anyone with some helpful info on parts location or bike that cross references with it wold be great. I would also like to replace the headlight with a brighter one as the low beam does basically nothing. Thanks in advance for the help.
|
|
08-05-2013, 06:16 PM | #2 |
Join Date: Mar 2012
Location: Altoona, Fl
Posts: 158
|
could you post some pics? that would help to identify your bike and allow us to help source parts. A quick google search yielded this, which looks a lot like a zong.
http://www.motorcycle.com/specs/vent...rack/base.html
__________________
NewStar DB 200 Facts are meaningless. You could use facts to prove anything that's even remotely true! --Homer Simpson |
|
08-06-2013, 12:33 AM | #3 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Please do post some photographs of your bike so we can identify it.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
08-09-2013, 04:07 PM | #4 |
Join Date: Jul 2013
Location: FLorida
Posts: 10
|
Here are some pics. Sorry for the delay, work, school and pregnant girlfriend
|
|
08-09-2013, 07:12 PM | #5 |
Join Date: Jun 2013
Location: Cumming, GA
Posts: 303
|
Same bike as mine. Look here.
http://www.chinariders.net/showthread.php?t=12856 |
|
08-10-2013, 02:02 AM | #6 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
The photos are a bit difficult to view, but I believe you own a Zongshen 200GY-2. I own the same motorcycle.
You might enjoy reading the threads in the "Zong Sticky," located at the top of the Dual Sport Forum. http://www.chinariders.net/showthread.php?t=6051 You can buy the parts you need from either Zongshen America, or directly from the Taobao website in China.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
08-10-2013, 11:57 PM | #7 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,055
|
This bike is the same as the 200GY-2. Qlink and Vento, as well as Zongshen, sold the same bike back in '05 or '06.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
08-10-2013, 08:53 AM | #8 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I like the 45 degree pod filter. Does it run ok?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-10-2013, 12:19 PM | #9 |
Join Date: Jul 2013
Location: FLorida
Posts: 10
|
Intake manifold
Bike runs fine with pod filter but it caused a problem with the already split intake manifold. I have since secured it so it doesn't vibrate so much. I need to locate another manifold any ideas on where to look?
|
|
08-10-2013, 12:40 PM | #10 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
You can get a carburetor intake manifold from Zongshen America, or Taobao. If you prefer, you can also get another air box.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
08-10-2013, 05:55 PM | #11 |
Join Date: Jul 2013
Location: FLorida
Posts: 10
|
TaoBao
I tried the taobao website but it is in Chinese and I can't read it. There were some agents but I don't trust that and I still have no way of ordering. I also tried the Zongshen America site but found no parts. I did email zonshen this afternoon. Thanks your help. I did find some parts for the tw200 that look like they match up.
|
|
08-10-2013, 11:12 PM | #12 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
Indeed, you need to contact Zongshen America by telephone or email; you won't find any parts listed on its website. If you live near Miami, I encourage you to visit the Zongshen America headquarters; you will get much better service in person.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
08-11-2013, 10:09 AM | #13 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
If you have the standard rubber intake i found wrapping it with electrical tape is a good temporary fix, i wouldnt advise it as a permanant fix, but it solved my idle issues and stalling issues for now... Just a hought...LOL its a cheap and easy fix...
|
|
08-11-2013, 11:21 AM | #14 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I bought a ton of Zong parts for my TW200 on Taobao through Tbtrends.com
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-11-2013, 11:49 AM | #15 |
Join Date: Jul 2013
Location: FLorida
Posts: 10
|
Thanks guys
SO glad I found your site, lots of helpful people and info. I live 2.5 hours North of Miami and may go take a look at the plant. I'm looking for some of the plastics covers if anyone has any they want to sell.
|
|
|
|
|
|