|
|
05-07-2016, 09:39 PM
|
#1 |
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Hawk, carb, sprockets, air box, new user,
I'm a new user to China riders. I got my hawk recently, i have owned a few other bikes. So far I'm impressed with the hawk. I've made a few mods added 17-45 sprockets. Cut into my Air box and snipped the sides and turned my blinker noise off thanks to motocheese Added new clutch and breaks. Added new speedometer. I have never changed or modified a carb, I want info with anyone who has done this on the hawk? Also I know with my crf (before being smashed) the front sprocket fit snugly with hardly any wiggle, but with hawk(and many other bikes) it wiggles just a little bit. Is this normal for the hawk? Also had it registered just fine here in Utah any Utah riders out there?
I've been reading a few threads everyone seems super cool, I'm glad to start sharing my journey with my first China bike. |
|
|
05-07-2016, 10:52 PM
|
#2 |
|
Join Date: Apr 2009
Posts: 770
|
welcome to the board
 lots of info here on the hawk AND, a LOT of the tutorials on the incoming csc 250tt will also apply.the answers to most of your questions should come up w a relevant search. Have fun
__________________
Seer's First LAW-"FLY THE PLANE!", fail that, and nothing else matters. 12th Law- Consider what marvels you might do if only you had tomorrow to live over again. Third Law-When someone tells you some thing "Can't Be Done", what they're really saying is They can't do it!!14th Law-Just because something "IS", doesn't necessarily mean it SHOULD be.. Eighth Law-The only true personal security is anonymity.Ninth Law-Humans tend to learn very little when speaking.10th Law-Some lives ARE worth taking |
|
|
|
05-07-2016, 11:06 PM
|
#3 |
|
Join Date: Apr 2015
Posts: 192
|
Front sprocket wiggle seems par for the bikes. I was just thinking now, pondering if a bed of silicon would be helpful. The accel then engine braking slaps it around some, and I'm sure there is some wear. The silicon might act like a cush hub (maybe)
|
|
|
|
05-07-2016, 11:51 PM
|
#4 |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
I've heard of one person using silicon on a Ktm before, but it kinda frightens me todo so. I'm damn sure not going to be the first one on the hawk todo so haha. But it might work, but good to know that it seems normal for a little wiggle. There is surprising not a lot of info out there, besides on this site. And even that is all trial and error.
Last edited by Swollbraham; 05-09-2016 at 11:40 AM. |
|
|
|
05-08-2016, 12:01 AM
|
#5 |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
Welcome aboard!
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
|
|
05-08-2016, 03:04 AM
|
#6 | |
|
Join Date: Feb 2016
Posts: 98
|
Quote:
|
|
|
|
|
05-08-2016, 06:30 AM
|
#7 |
|
Join Date: Apr 2016
Location: New Hampshire
Posts: 46
|
Welcome to the forum and China Bikes. The counter shaft is hardened, so the wear will be to the sprocket. You will replace the sprocket due to normal chain/sprocket wear before the slop at the counter shaft/sprocket becomes a problem. Chain lube or grease when assembled should slow the wear to the shaft/sprocket contact area. Enjoy.
2015 Hawk 250 1972 Honda CT70 Past 1982 GS1100L 1983 Honda ATC 185s 2ea. 1974 Puch 175mx Last edited by lefty; 05-08-2016 at 06:31 AM. Reason: spelling |
|
|
|
05-08-2016, 10:10 AM
|
#8 | |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Quote:
|
|
|
|
|
05-09-2016, 01:43 AM
|
#9 | |
|
Join Date: Feb 2016
Posts: 98
|
Quote:
|
|
|
|
|
05-09-2016, 02:21 AM
|
#10 |
|
Join Date: May 2016
Posts: 583
|
You mentioned motocheese, why not follow his instructions and rejet the stock carb?
|
|
|
|
05-09-2016, 11:28 AM
|
#11 |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Honestly I haven't seen that video. Maybe I'll give it a try. I've just never messed with the carb before, done lots of other mods but always strayed away from the carb. Possibly for the risk of messing the bike up. But I would like to get the hawk to run comfortably around 70mph this might not be possible, but with all the mods I'm sitting at about 60ish so carb is the next option.
|
|
|
|
|
|
 |
| Tags |
| carb, carburetor, dmv, hawk, sprocket |
|
|
Hybrid Mode
