|
|
06-08-2018, 09:56 AM
|
#1 |
|
Join Date: Jun 2018
Posts: 4
|
Hibird Engine Tune up Specs
Hi all,
I have a 2006 Hibird qh200e. I've had it for about 5 years now, and want to check the tuning on the engine, specifically the valve lash. Does anyone have any repair manuals or the tuning specs for this engine? Thanks |
|
|
06-08-2018, 12:10 PM
|
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Welcome! Can you show us a pic of the engine? Is it OHC or OHV?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
06-08-2018, 07:56 PM
|
#3 | |
Join Date: Mar 2008
Posts: 2,436
|
Quote:
 OHV (CG)  CB [manual]ref to those good old XR/CRF… [valve clearance] IN/ex .1mm (.004") CG [Manual] http://josemaco.files.wordpress.com/...h-62ktjam5.pdf | IN/EX: .08mm (.003")
__________________
Last edited by humanbeing; 06-09-2018 at 04:49 AM. |
|
|
|
|
06-18-2018, 01:26 AM
|
#5 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That is a trusty CG engine. Search CG125 on Youtube, and you'll find all the specs you need. The CG manual Humanbeing linked to will also answer a lot.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
06-18-2018, 01:40 PM
|
#6 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
I noticed it states 'Wildfire' on the engine, a defunct US brand. You mentioned Hibird, which if memory serves, were related to Lifan. Wildfire got into big trouble faking EPA reports or something like that, and their OEM was Lifan, and probably Hibird, too (I believe Hibird used to OEM parts or bikes for Lifan). Humanbeing could probably confirm the connection. My gut feeling is to dig into Lifan information.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
|
|
07-05-2018, 08:01 PM
|
#7 |
|
Join Date: Jun 2018
Posts: 4
|
Thanks for all the information! I really appreciate it. I've worked over this bike quite a bit already to increase the performance. Does anyone have any suggestions on squeezing a little more out of it though? I've swapped the sprockets and put bigger tires/wheels on it.
|
|
|
|
07-06-2018, 12:50 PM
|
#8 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Like any four stroke, it will respond to traditional improvements in breathing. A free-flowing exhaust with a less restrictive air filter (with jetting to match) will wake it up. Beyond that, you can try a programmable CDI (although that can make it difficult to start). If you really want to get into it, you can port and polish the head, like Dan and Jerry have.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
07-07-2018, 01:05 PM
|
#10 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Jets can be found at www.jetsrus.com, eBay and Amazon; you can also find them at the local motorcycle shop. It's best to remove the jets from the carb and measure them for starters. If you show us a pic of the jets, we can guide you further.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|
 |
| Tags |
| hibird, repair, tuning |
|
|
Hybrid Mode
