|
12-13-2011, 04:13 AM | #1 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Honda XR650L: Top end rebuild and tire report
Several days ago, for the first time in December, the daily high temperature rose above freezing, reaching a balmy, 35 degrees Fahrenheit. :roll: Therefore, I took my XR650L for a short ride to test the recent rebuild of my engine’s top end. I’m pleased to report my bike runs as good as new.
Here’s a photograph of my CST, Surge I, front tire after 9,700 miles of wear. After I returned home, I immediately changed the front tire, and installed another CST, Surge I tire. Here’s a photograph showing a new, CST, Surge I, front tire juxtaposed with the stock front tire. It’s also time for me to install a new rear tire. Here are several photographs I took of my current, Dunlop, D952 rear tire with 5,925 miles of wear. The D952 has been a great tire, and it is my current favorite of all the rear tires I have mounted on my XR650L. Here’s a photograph of the D952 when it was new, juxtaposed with the Kenda TrakMaster tire it replaced after 3,900 miles of wear. Since the mountain trails are covered with snow, I will continue to ride the pavement with my D952 rear tire until spring weather arrives. After the gravel roads thaw out I will next mount a Pirelli, MT21 rear tire, shown in the photograph below. In the photograph above a Kenda TrakMaster tire is mounted on the bike. The other tires, moving from left to right, are the Dunlop D952, the Pirelli MT21, and another Kenda TrakMaster tire. Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-13-2011, 11:38 AM | #2 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
I gotta hand it to you Spud, you know your tires and get great mileage out of them! I have a bit more ruthless throttle hand I think and I only see half of the mileage you get.
Glad you got the BRP sorted. What's on the menu for the KLX? :P
__________________
Happy to serve. |
|
12-13-2011, 02:16 PM | #3 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I'm going to disassemble the KDX220 after the holidays, Doc. I think I will powdercoat the frame. Of course, I need to clean and examine the engine.
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-13-2011, 02:27 PM | #4 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
At least most of the work you can do in your nice warm kitchen, Brother Spud!
I'm very jealous of the KDX :wink: . I've been searching CL daily since you got yours. Nothing turns up locally. I do know that guy in Walla Walla with his (See my Ride Report) but he ain't gonna EVER sell it!
__________________
Happy to serve. |
|
12-13-2011, 04:06 PM | #5 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
12-13-2011, 04:13 PM | #6 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
LOL!
I'll make sure my heath insurance is paid up that's for sure!
__________________
Happy to serve. |
|
12-13-2011, 07:09 PM | #7 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I'd love to see a faithful, genuine, Chinese copy of the XR400R. Have we been looking for one? Should we start a new thread in the Dual Sport Forum, dedicated to locating a Chinese version of the XR400R? :?:
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
12-13-2011, 09:33 PM | #8 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Do you mean a genuine Chinese version? I won't settle for less.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-13-2011, 11:10 PM | #9 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
That's because you are a man of discriminating taste, Brother Weld! Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|
|