Go Back   ChinaRiders Forums > Technical/Performance > Street
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-05-2013, 03:47 PM   #1
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
i think ive got it

ive been running down the voltages and the trigger coil had the right oms resistance but no voltage when rotating the motor its only geting 0.04 or .11 + volts DC but i dont think thats enough


 
Reply With Quote
Old 05-05-2013, 03:49 PM   #2
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
spud

i wish spud was around he seems to know a lot... SUPER SPUD WHERE ARE YOU!!!!


 
Reply With Quote
Old 05-05-2013, 08:47 PM   #3
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
nope

nope didnt fix it i also discovered the lifan cdi had a different pit wiring then the zong cdi.......had a lot of bikes in hte past this is my first headache .............


 
Reply With Quote
Old 05-06-2013, 08:43 AM   #4
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
well.....

i think i may have isolated it the green and white off of the trigger coil goes up to a plug on the other side (wiring harness for the bike side) the wire turns solid green and that side is grounded no matter where i touch so ill be un tapping the harness and looking for shorts there


 
Reply With Quote
Old 05-06-2013, 09:02 AM   #5
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
i found this



i found this on another post and going by this my 250gs trigger wire is wired wrong the green and white i have is going to ground not an isolated circuit


 
Reply With Quote
Old 05-06-2013, 11:09 AM   #6
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Before you go further, do you have a four pin reg and an eight pin cdi, like in the diagram?
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 05-06-2013, 03:04 PM   #7
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
hmm good chatch

5 wire regulator..... 3 yellow 1 red 1 green


 
Reply With Quote
Old 05-06-2013, 03:05 PM   #8
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
and yes the cdi is 8 pin Zong orgnial also have a lifan 300cc box 8 pin


 
Reply With Quote
Old 05-06-2013, 03:18 PM   #9
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
closer

this is a closer diagram of my bike i'm missing the black wire off my regulator tho its in the harness and in the plug but no hole in the regulator where a wire might have come from or markers of where it was in the regulator plug but like i said on the harness side there is a dead ended black wire


 
Reply With Quote
Old 05-06-2013, 07:23 PM   #10
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
LOOK WHAT I FOUND!!

http://wtmp.en.alibaba.com/ They make the cdi box's time to get some i'm trying to order 2 for my self.


 
Reply With Quote
Old 05-06-2013, 09:51 PM   #11
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
i love talking to my self

i hope these updates help people i'm talking to a china men in china who's supplied me inventory for my shop he's vary happy with these bikes (he owns 4) and said they are like a Chinese Harley they run like tops till they cough i have him on Skype on a 3 way with the parts suppler i posted in my earlier post


 
Reply With Quote
Old 05-07-2013, 12:41 AM   #12
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Cool! How is his English?
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 05-07-2013, 01:15 AM   #13
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
english is ok not the best but ive seen way worse

English was ok a but broken and confusing as to the terminology but once i learned the terminology like a "winker" is the flasher and the CDI is a ignitor so-forth and so one any ways its 60 USD for a cdi with DHL shipping expedited 7-10 day shipping

i talked with wtmp and best to there knowledge ZS ly200 cdi WILL work with a zs250GS.....


 
Reply With Quote
Old 05-07-2013, 01:26 AM   #14
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
after reviewing the logs of the the convo i found out they are going to make an ali express listing for cdi box's on www.aliexpress.com that meens factory direct CD box's for us [/url]


 
Reply With Quote
Old 05-07-2013, 07:45 AM   #15
Corvairkid   Corvairkid is offline
 
Corvairkid's Avatar
 
Join Date: Apr 2013
Location: Daytona beach
Posts: 218
250cc cdi box

http://wtmp.en.alibaba.com/product/2...ngshen250.html here you are 250cc cdi box for zonghen


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:44 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.