|
|
05-11-2016, 03:22 PM
|
#1 |
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Oil Housing Assembly(Hawk)
I did some searching before posting this, could not find what i need.
As i was changing my oil on the hawk. I realized there is no spring in the housing. im Assuming it was assembled without one installed. With out the spring there is no filtration of the oil. (this doesn't startle me just yet because it has clean oil and only has about 90 miles on it) but can anyone tell me where i can get a new spring? or the size of the original spring? |
|
|
05-12-2016, 12:37 AM
|
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Just so I'm sure, there was no spring under the strainer cap? That's a new one.
The spring for a Honda XR200 should be a perfect match, as long as it's '81-'83 or '86 on. The '84-'85 models were OHC, and possibly used different strainer springs. You can probably find a replacement at www.rockymountainatvmc.com or www.bikebandit.com
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
05-12-2016, 12:38 AM
|
#3 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
BTW, while you're ordering the spring, order a new cap to keep on hand. Cracking one with no replacement will ruin your day.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
05-12-2016, 07:25 AM
|
#4 | |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Quote:
Rocky Mountain atv is like an hour away from me I called them they said they don't have a part number for the hawk spring. I thought about trying to guess by size, but have no idea what kind of pressure it needs on the filter itself. Thanks for the heads up about the extra cap. I can try to see if the Honda spring fits I'll update when I find out. |
|
|
|
|
05-12-2016, 01:05 AM
|
#5 |
|
Join Date: May 2016
Posts: 583
|
Does anyone make magnetic caps and magnetic drain plugs for it?
|
|
|
|
05-12-2016, 07:25 AM
|
#6 | |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Quote:
|
|
|
|
|
05-12-2016, 10:14 AM
|
#7 | |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
05-12-2016, 10:32 AM
|
#8 |
|
Join Date: May 2016
Posts: 583
|
Prima uses an aluminum cap milled a little different than stock to hold a magnet.
|
|
|
|
05-12-2016, 10:48 AM
|
#9 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That's cool. Most of the Hondoids only use the cap and strainer as an oil drain, and do not have a drain plug, per se. Typically, China ATV's that use a Hondoid vertical motor will have a drain plug, so they could use a magnetic bolt.
A strainer cap with a magnet would be cheap insurance.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
05-12-2016, 11:22 AM
|
#10 |
|
Join Date: May 2016
Posts: 583
|
The kit is for a Chinese GY6 scooter. Magnetic drain plugs for both engine and gearbox and of course the strainer cap.
|
|
|
|
05-12-2016, 12:26 PM
|
#11 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Here is a photo of my first oil change. Lifan engine hope it helps
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
|
|
05-12-2016, 12:40 PM
|
#12 | |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Quote:
But do you by chance have a measurement on that spring? |
|
|
|
|
05-12-2016, 12:52 PM
|
#13 | |
|
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Quote:
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
|
|
|
05-12-2016, 01:00 PM
|
#14 | |
|
Join Date: Apr 2016
Location: North Utah
Posts: 37
|
Quote:
|
|
|
|
|
05-16-2016, 10:58 AM
|
#15 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|
 |
| Tags |
| filter, hawk, oil, spring |
|
|
Hybrid Mode
