|
02-08-2017, 01:39 PM | #1 |
Join Date: Apr 2016
Posts: 100
|
TT250 parts interchangeable with Hawk??
Are the body panels on the TT250 interchangeable with the hawk 250? Specifically the rear cover?
It looks to have the same bolt pattern but I'm not sure. I'm looking to replace the rear cover due damage and it seems relatively inexpensive to replace if it's the TT250 part. http://www.cscmotorcycles.com/TT250-...VER-s/357.html http://www.therps.net/DB-Hawk.html Has anyone had experience ordering parts, in general, for the TT250 and using them for the Hawk?
__________________
2015 Hawk 250 ~ Aftermarket Exhaust/K&N/LED everything/16/44T/Shinko 705's |
|
02-08-2017, 05:55 PM | #2 | |
Join Date: Sep 2015
Posts: 436
|
Quote:
|
|
|
02-08-2017, 06:45 PM | #3 |
Join Date: May 2016
Location: Bismarck, ND
Posts: 868
|
I know somebody here combined the two piece side panel with front half from a TT250 and the back half from the Hawk.
__________________
2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't. |
|
02-08-2017, 07:32 PM | #4 |
Join Date: May 2016
Location: Bismarck, ND
Posts: 868
|
__________________
2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't. |
|
02-08-2017, 11:27 PM | #6 |
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Yup! Wiring AND speed sensor is different.....
|
|
02-15-2017, 09:24 PM | #7 |
Join Date: Apr 2016
Posts: 100
|
What about spokes? I have a few that are broken on my rear wheel. I was going to order everything at once, but I've found a few threads that say the TT250 spokes don't fit, idk if that's still true. I appreciate all of your responses guys!
__________________
2015 Hawk 250 ~ Aftermarket Exhaust/K&N/LED everything/16/44T/Shinko 705's |
|
|
|
|
|