|
07-09-2019, 01:28 PM | #1 |
Join Date: Jun 2019
Location: Arizona
Posts: 12
|
Help with wider stance in rear.
2017 TaoTao Arrow 150
I would like to widen the rear end by four inches, two inches per side. I found spacers that fit, but I really don't want to use them. I'd rather widen the axle. Anyone know where I can find parts like this, or know a stock part from another kart that is wider? Even if it isnt a full four inches and split the difference in offset, any help will be greatly appreciated. |
|
07-09-2019, 02:11 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
I think the Arrow 150 comes with a 42" long axle. I don't know if you will find anything longer and be an exact fit. Most axles I have seen were 36" to 40" long. I've ran 1 1/2" spacers on a Honda 200X that puts out way more HP than the 150cc engine with no problems. Just make sure they are good quality. I've seen some of the cheap ones sold on ebay studs brake off.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
07-09-2019, 05:45 PM | #3 |
Join Date: Jun 2019
Location: Arizona
Posts: 12
|
I kinda figured size would be an issue. I was searching for a while and never saw anything bigger.
|
|
08-29-2019, 08:48 AM | #4 | |
Join Date: Aug 2019
Location: Bay City, MI
Posts: 398
|
Quote:
Plus a pair of such spacers generally only runs about $50-$60 and you'd be hard pressed to achieve the results you want for less than that, for sure. |
|
|
|
|
|
|