Lifan Xpect

Jakkson614 · 03-05-2023, 08:51 PM

I have a buddy working on my bike we took it apart and valve failure. He said buy an entire valve assembly. I’m a hard time deciding on which one to buy. I don’t want to get the wrong part any suggestions.

Is this one ok?

https://www.ebay.com/itm/13380231394...BoCU44QAvD_BwE

XLsior · 03-05-2023, 09:50 PM

if its a push rod CG engine then that head should be fine.

Jakkson614 · 03-05-2023, 09:53 PM

Ok I’m new to this and I didn’t want to buy anything before I made sure

XLsior · 03-05-2023, 09:56 PM

what is wrong with the old head, bent valve?

you might want to inspect the push rods if that's the case.

Jakkson614 · 03-05-2023, 10:00 PM

He checked everything out and just told me I need a replacement head. There is a language barrier between us but guy knows his stuff

XLsior · 03-05-2023, 10:01 PM

a 250 head would work too...

using your ebay link page...

https://www.ebay.com/itm/12543481117...item1d347f5322

Jakkson614 · 03-05-2023, 10:06 PM

Ok man I’ll order it. Thank you for the info. I didn’t know a 250 would work. That’s crazy

Jakkson614 · 03-05-2023, 10:09 PM

What about the head temp sensor?

XLsior · 03-05-2023, 10:19 PM

Is your bike EFI?
Not personally familiar with EFI systems.

that might complicate things...

Jakkson614 · 03-05-2023, 10:21 PM

Yes EFI

XLsior · 03-05-2023, 10:31 PM

i'm not sure how integral the head temp sensor is to the EFI operation.

Both heads will fit...

The C200 head should not alter factory specs like compression/valve clearance/pushrod length.

The Cg250 head will bolt on to a cg200 cylinder...but im not making any guarantees...

I can't find any EFI heads. I don't know where the temp sensor is located...

Sorry that's as far as I can help...

Megadan · 03-06-2023, 08:15 AM

You can drill and tap the head for the temp sensor in a couple of spots. the underside of the top motor mount flange seems to be a good place to do so.

Jakkson614 · 03-06-2023, 08:45 AM

So which head should I purchase then? The CG250 head even tho I have a 200cc ??

Boatguy · 03-06-2023, 03:36 PM

Also, don’t forget to try these guys. They know what they are talking about. It’s a little better than ordering without the information. They can probably get you the actual head that you need. The factory part.

https://kpclubusa.com/collections/x-pect

Thevines2 · 03-07-2023, 05:46 AM

I been doing a ton of research on lifan bikes, this seems to be a common issues if the valves are not adjusted shortly after getting the bike with most these China bikes. I'm back n forth between xpect kpx250,kpm200 turned into scrambler/enduro(tires, brush guard or skid plate, handlebars?, handguards,etc) really can't find too many reasons to not go with lifan for the price. But yeah the valves seem to come too tight stock and causes them to wear out and break prematurely

03-05-2023, 08:51 PM	#1
Jakkson614 Join Date: Mar 2023 Posts: 7	Lifan Xpect I have a buddy working on my bike we took it apart and valve failure. He said buy an entire valve assembly. I’m a hard time deciding on which one to buy. I don’t want to get the wrong part any suggestions. Is this one ok? https://www.ebay.com/itm/13380231394...BoCU44QAvD_BwE
	0

03-06-2023, 08:15 AM	#12
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,110	You can drill and tap the head for the temp sensor in a couple of spots. the underside of the top motor mount flange seems to be a good place to do so. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

03-06-2023, 03:36 PM	#14
Boatguy Join Date: Feb 2021 Location: Northeast Posts: 934	Also, don’t forget to try these guys. They know what they are talking about. It’s a little better than ordering without the information. They can probably get you the actual head that you need. The factory part. https://kpclubusa.com/collections/x-pect __________________ 2020 Lifan x-pect
	1

03-05-2023, 09:50 PM	#2
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	if its a push rod CG engine then that head should be fine.
	0

03-05-2023, 09:53 PM	#3
Jakkson614 Join Date: Mar 2023 Posts: 7	Ok I’m new to this and I didn’t want to buy anything before I made sure
	0

03-05-2023, 09:56 PM	#4
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	what is wrong with the old head, bent valve? you might want to inspect the push rods if that's the case.
	0

03-05-2023, 10:00 PM	#5
Jakkson614 Join Date: Mar 2023 Posts: 7	He checked everything out and just told me I need a replacement head. There is a language barrier between us but guy knows his stuff
	0

03-05-2023, 10:01 PM	#6
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	a 250 head would work too... using your ebay link page... https://www.ebay.com/itm/12543481117...item1d347f5322
	0

03-05-2023, 10:06 PM	#7
Jakkson614 Join Date: Mar 2023 Posts: 7	Ok man I’ll order it. Thank you for the info. I didn’t know a 250 would work. That’s crazy
	0

03-05-2023, 10:09 PM	#8
Jakkson614 Join Date: Mar 2023 Posts: 7	What about the head temp sensor?
	0

03-05-2023, 10:19 PM	#9
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	Is your bike EFI? Not personally familiar with EFI systems. that might complicate things...
	0

03-05-2023, 10:21 PM	#10
Jakkson614 Join Date: Mar 2023 Posts: 7	Yes EFI
	0

03-05-2023, 10:31 PM	#11
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	i'm not sure how integral the head temp sensor is to the EFI operation. Both heads will fit... The C200 head should not alter factory specs like compression/valve clearance/pushrod length. The Cg250 head will bolt on to a cg200 cylinder...but im not making any guarantees... I can't find any EFI heads. I don't know where the temp sensor is located... Sorry that's as far as I can help...
	0

03-06-2023, 08:45 AM	#13
Jakkson614 Join Date: Mar 2023 Posts: 7	So which head should I purchase then? The CG250 head even tho I have a 200cc ??
	0

03-07-2023, 05:46 AM	#15
Thevines2 Join Date: Mar 2023 Posts: 4	I been doing a ton of research on lifan bikes, this seems to be a common issues if the valves are not adjusted shortly after getting the bike with most these China bikes. I'm back n forth between xpect kpx250,kpm200 turned into scrambler/enduro(tires, brush guard or skid plate, handlebars?, handguards,etc) really can't find too many reasons to not go with lifan for the price. But yeah the valves seem to come too tight stock and causes them to wear out and break prematurely
	0