|
02-13-2020, 10:21 PM | #1 |
Join Date: Jan 2020
Posts: 3
|
Apollo 250
Hi everyone,
I recently purchased a non-running 250, and got her all fixed up! Still need a few more items but so far so good. Also, could someone tell me the proper chain tensions specs? and at which part of the chain I measure from? Thank you! |
|
02-14-2020, 12:02 PM | #3 |
Join Date: Feb 2020
Location: Tampa Bay Area
Posts: 53
|
Nice. Welcome. Just ordered a blue 250 myself. Waiting on it to be delivered!
|
|
02-14-2020, 12:05 PM | #4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Welcome!
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
02-14-2020, 09:36 PM | #5 |
Join Date: Dec 2019
Posts: 17
|
Can be anywhere between 20-30mm of slack from center of chain. Get an old credit card and make 2 lines. One 20mm and one 30mm from one of edges. Put top of card dead center of chain at the most slacked spot/section(usually just past halfway point on bottom section of chain) move slack up & down and make sure it's not exceeding 30mm. Measurements are done from center of chain to center of chain.
|
|
|
|
|
|