ATC 200X with Lifan engine on E-Bay

frostbite · 07-30-2006, 05:01 PM

Interesting auction:

http://cgi.ebay.com/ebaymotors/1983-...12663449QQrdZ1

culcune · 07-31-2006, 12:53 AM

I wonder what constitutes Lifan "racing" engine? I think Hooper sells the wiring/electrics for installing the engines on old Hondas. I wonder if the Thumpertalk crowd would be happy to hear about these damn commie engines finding their way into old Japanese bikes? After all, just a few months ago, if you mentioned that you wanted a Chinese bike, the replies would be to look for a 1982 Honda so and so instead for $2000 and you just need to put another $2000 to get it running, which makes it a much better deal than a $950 brand new Chinese bike...

bfe71730 · 07-31-2006, 02:52 PM

I e-mailed the seller and asked some questions about the aftermarket exhaust, if it bolted up to the lifan motor without any mods,if so then we could have another exchangeable part. If I ever get the time, I'd take the one off my 200x and try it, they are shaped the same and has mounting holes in the same locations, only thing is, these header pipes get really hot and will melt plastic if it is anywhere close. The head pipe is quite larger that the factory one, allows for more exhaust flow and will give a noticeable power increase with the proper jetting.

damm, that was quick, just hear form the seller, the exhaust and motor bolted right up with no mods, he ordered the Cobra exhaust from dennis kirk, 83-85 honda atc 200x. Who's gonna be the first to try it on their china bike?

frostbite · 07-31-2006, 06:07 PM

Quote:

just hear form the seller, the exhaust and motor bolted right up with no mods, he ordered the Cobra exhaust from dennis kirk, 83-85 honda atc 200x. Who's gonna be the first to try it on their china bike?

Even if the Cobra exhaust bolts up to the Lifan head there is no guarantee the rest of the exhaust will fit/bolt up to a china bike frame.

Why don't you try an 'exhaust transplant' on your 200X to see if the stock exhaust will fit on the china bike?

Enquiring minds want to know...

panterra_rider · 08-01-2006, 08:29 AM

IMHO, you'll probably end up losing low-end grunt...I bought a Cobra years ago for my xl250r and didn't think it was really worth it - and that was on a bike. Plus, I think Beerslayer made a good point elsewhere about noise factor and how the trade off for more power is likely not offset by the "piss off" factor on the trails that increases. Still, we're all extremely curious about modding these engines (from what I gather on these forums) and exhaust is a pretty basic (and good!) place to start.

Cheers,
R.

bfe71730 · 08-01-2006, 06:49 PM

ok, I'll see what I can do this weekend, take some pics and post them. just from taking a close look at it, the mounting holes may need to be relocated, all the bends and curves seem to be in the right places. These exhausts are loud, but somewhat mild compared to a Harley running straight pipes. I wouldn't ride it during hunting season, I'll put it that way.

bfe71730 · 10-22-2006, 08:50 PM

well, I finally got around to trying an exhaust transplant, with 2 different types of aftermarket exhaust. One was the Cobra and the other was a generic brand, both had the same size head pipe, but one was longer than the other to where the muffler part sliped on. both head pipes bolted right up, but when it came to the other ends, the mono shock was right in the way of the bends. I think there is a member here that has a chinese motor mounted on an XR frame, anyway we could talk him into trying it out on a chinese frame?

culcune · 10-22-2006, 09:59 PM

bfe, his handle is 'ob1'. He calls it the Chi-com special or something like that.

ActionJaxxon · 04-05-2007, 07:29 AM

i got a custom exhaust made for my chinese atv as it was cheaper than buying one off the shelf. instant horsepower increase and its actually quieter than the stock one. then i bolted the stock one onto my bro,s honda atc200 with only a little plastic guard mod.

liverchip · 04-05-2007, 07:41 PM

Where did you get it made at? Local shop?

ActionJaxxon · 04-10-2007, 05:29 AM

Yeh, theres a local guy here who hand maked all the yzf 250 and 400 headers and pipes for the local factory riders. i was put onto him by a friend who got him to make a new muffler for his cr500 into a 250 frame

NewEnglandTrails · 04-10-2007, 05:22 PM

Action,

Liked your exhaust.. Is your 200 watercooled? Did that come with the atv? What make ATV do you have?

NET

ActionJaxxon · 05-05-2007, 04:13 AM

its actually a 250cc watercooled. Its called a dragon. Had to change the jets after putting the pipe on as it was running lean, went from a #105 to a #120 main and from #42 to #45 pilot with the jet needle on the richest clip setting(could probably go to a #48

ActionJaxxon · 05-05-2007, 04:28 AM

this is the website of the place i got it from, some ok photos of it there
http://www.dragonmotorcycles.com.au/frame_atvs.html its the 9th one down the list.

07-31-2006, 02:52 PM	#3
bfe71730 Join Date: May 2006 Location: South Arkansas Posts: 198	I e-mailed the seller and asked some questions about the aftermarket exhaust, if it bolted up to the lifan motor without any mods,if so then we could have another exchangeable part. If I ever get the time, I'd take the one off my 200x and try it, they are shaped the same and has mounting holes in the same locations, only thing is, these header pipes get really hot and will melt plastic if it is anywhere close. The head pipe is quite larger that the factory one, allows for more exhaust flow and will give a noticeable power increase with the proper jetting. damm, that was quick, just hear form the seller, the exhaust and motor bolted right up with no mods, he ordered the Cobra exhaust from dennis kirk, 83-85 honda atc 200x. Who's gonna be the first to try it on their china bike? __________________ 2004 KAZUMA CHEETAH 200 2001 Yamaha Big Bear 400 1986 Honda ATC 250ES 1983 Honda ATC 200X 1974 Kawasaki KE100
	0

08-01-2006, 08:29 AM	#5
panterra_rider Join Date: Jun 2006 Location: Saskatchewan, Canada! Posts: 85	IMHO, you'll probably end up losing low-end grunt...I bought a Cobra years ago for my xl250r and didn't think it was really worth it - and that was on a bike. Plus, I think Beerslayer made a good point elsewhere about noise factor and how the trade off for more power is likely not offset by the "piss off" factor on the trails that increases. Still, we're all extremely curious about modding these engines (from what I gather on these forums) and exhaust is a pretty basic (and good!) place to start. Cheers, R. __________________ 2 Hensim-built 150cc dirtbikes (Panterra branded) Kazuma 110cc Lacoste quad
	0

08-01-2006, 06:49 PM	#6
bfe71730 Join Date: May 2006 Location: South Arkansas Posts: 198	ok, I'll see what I can do this weekend, take some pics and post them. just from taking a close look at it, the mounting holes may need to be relocated, all the bends and curves seem to be in the right places. These exhausts are loud, but somewhat mild compared to a Harley running straight pipes. I wouldn't ride it during hunting season, I'll put it that way. __________________ 2004 KAZUMA CHEETAH 200 2001 Yamaha Big Bear 400 1986 Honda ATC 250ES 1983 Honda ATC 200X 1974 Kawasaki KE100
	0

10-22-2006, 08:50 PM	#7
bfe71730 Join Date: May 2006 Location: South Arkansas Posts: 198	well, I finally got around to trying an exhaust transplant, with 2 different types of aftermarket exhaust. One was the Cobra and the other was a generic brand, both had the same size head pipe, but one was longer than the other to where the muffler part sliped on. both head pipes bolted right up, but when it came to the other ends, the mono shock was right in the way of the bends. I think there is a member here that has a chinese motor mounted on an XR frame, anyway we could talk him into trying it out on a chinese frame? __________________ 2004 KAZUMA CHEETAH 200 2001 Yamaha Big Bear 400 1986 Honda ATC 250ES 1983 Honda ATC 200X 1974 Kawasaki KE100
	0

10-22-2006, 09:59 PM	#8
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	bfe, his handle is 'ob1'. He calls it the Chi-com special or something like that. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

07-30-2006, 05:01 PM	#1
frostbite Join Date: May 2006 Location: Fredericton, NB, Canada Posts: 1,744	ATC 200X with Lifan engine on E-Bay Interesting auction: http://cgi.ebay.com/ebaymotors/1983-...12663449QQrdZ1 __________________ Frostbite "The beatings will continue until moral improves"
	0

07-31-2006, 12:53 AM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	I wonder what constitutes Lifan "racing" engine? I think Hooper sells the wiring/electrics for installing the engines on old Hondas. I wonder if the Thumpertalk crowd would be happy to hear about these damn commie engines finding their way into old Japanese bikes? After all, just a few months ago, if you mentioned that you wanted a Chinese bike, the replies would be to look for a 1982 Honda so and so instead for $2000 and you just need to put another $2000 to get it running, which makes it a much better deal than a $950 brand new Chinese bike...
	0

04-05-2007, 07:29 AM	#9
ActionJaxxon Join Date: Apr 2007 Posts: 7	i got a custom exhaust made for my chinese atv as it was cheaper than buying one off the shelf. instant horsepower increase and its actually quieter than the stock one. then i bolted the stock one onto my bro,s honda atc200 with only a little plastic guard mod.
	0

04-05-2007, 07:41 PM	#10
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	Where did you get it made at? Local shop? __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

04-10-2007, 05:29 AM	#11
ActionJaxxon Join Date: Apr 2007 Posts: 7	Yeh, theres a local guy here who hand maked all the yzf 250 and 400 headers and pipes for the local factory riders. i was put onto him by a friend who got him to make a new muffler for his cr500 into a 250 frame
	0

04-10-2007, 05:22 PM	#12
NewEnglandTrails Join Date: Sep 2006 Location: The Quiet Corner of CT. Posts: 387	Action, Liked your exhaust.. Is your 200 watercooled? Did that come with the atv? What make ATV do you have? NET __________________ 2006 HIBIRD QH200-st atv, 2005 Kinroad 200GY-01, 2006 Roketa DB-05, 1980 Kawasaki KZ440 LTD
	0

05-05-2007, 04:13 AM	#13
ActionJaxxon Join Date: Apr 2007 Posts: 7	its actually a 250cc watercooled. Its called a dragon. Had to change the jets after putting the pipe on as it was running lean, went from a #105 to a #120 main and from #42 to #45 pilot with the jet needle on the richest clip setting(could probably go to a #48
	0

05-05-2007, 04:28 AM	#14
ActionJaxxon Join Date: Apr 2007 Posts: 7	this is the website of the place i got it from, some ok photos of it there http://www.dragonmotorcycles.com.au/frame_atvs.html its the 9th one down the list.
	0