|
![]() |
#1 |
Join Date: Apr 2010
Location: Azuay Province, Ecuador
Posts: 319
|
fuel stabilizer
I''m unable to find a fuel stabilizer here in Ecuador, my moto will be sitting a few months so I stopped by the Bajaj dealer today and asked the mechanic what to do. He told me that they don't use it here and suggested that I use WD-40. He says I would have to use a whole can of WD-40, slosh it around in the tank and run it through the carburetor, according to him, there will be no varnish buildup. Well, I'm not sure if I believe this or not, what do you guys think?
__________________
http://r1150rt.smugmug.com/ |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Can you get Marvel Mystery Oil?
__________________
Happy to serve. |
![]() |
![]() |
#3 |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,265
|
I'm just waiting for someone to invent a Rider stabilizer....
WooHoo no more falling off...
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
![]() |
![]() |
#4 |
Join Date: Apr 2010
Location: Azuay Province, Ecuador
Posts: 319
|
I don't think so Doc, I've seen several brand of gas treatment but that's it. I'll sort something out tomorrow, I don't think the WD-40 would harm the moto but have decided not to try it.
__________________
http://r1150rt.smugmug.com/ |
![]() |
![]() |
#5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
WD-40 is excellent for the original purpose it was designed for: to displace water. If you're concerned about storing your moto in your specific climate, you could drain the tank and either pour some in liquid WD-40 and slosh it around or fog the interior of the tank with WD-40 spray. Either method will help to prevent corrosion.
I'd simply drain the carb, remove the bowl and dry it out. A little compressed air will speed up the process.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#6 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Personally, I wouldn't run WD40 through the carburetor.
![]() ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#7 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
fuel stabilzer
Hello .. I was told that mixed fuel as used in a 2 stroke does not crap out... for short periods maybe for 6 months or more it might.. can you just get premium fuel down there??? or as WELDAND GRIND says... drain it all out.. carb & everything..
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
![]() |
![]() |
#8 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
With my lawn equipment I usually just run them out of gas before storage.
For the mixed gas I buy the no-ethanol premium found at a few stations around here. I run it in the mowers and tractor too. Cost about 50 cents more a gallon than regular, but I don't have carb or fuel line problems. I think the best thing to do is to just drain the gas and empty the carb.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#9 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I think that emptying the carb is preferred over just running the carb out of fuel, because the fuel below the jets will remain in the bowl.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#10 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
The stroke carbs do not have a bowl to drain. Leaf blower, trimmer etc. I do drain the bowls on the lawn mowers.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#11 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
I find it interesting that a person can get alcohol free fuel in Kansas. Even out here in the Pacific Northwest, most fuel is contaminated with alcohol. Another option if a person cannot find fuel stabilizer, would be Aviation fuel. Aviation's fuel is very stable, and will never harm anything, even if left in for about a year.
__________________
Happy to serve. |
![]() |
![]() |
#12 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
You have to look for it. The closest pump is 15 miles away, but I will get about 20 gallons at a time. We use it in all the small engines. The price is higher than premium.
There is more of these pumps than E85 pumps. My work vehicle is E85, but I cannot find a pump to fill it at.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#13 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Not very many in your area: http://www.e85vehicles.com/e85-stations/e85-kansas.html
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#14 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
There is a few, but none on my typical driving pattern. I can get it with I go down to Tulsa.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
|
![]() |
![]() |
|
|