TBR7 clutch slipping?

757nick · 07-13-2022, 01:31 AM

My 2021 tbr7 has about 5k miles on it and Iv done all the valve adjustments and oil changes on time every time. If I’m at a complete stop I’ll take off and go to shift to 2nd gear and it will catch then slip into neutral then get stuck in neutral for a few seconds and let me go back up. It’s a new problem and I’m not sure what’s going on. I don’t have lose of power like it’s “slipping” . Any ideas on what it couod be and how to fix? thank you!

757nick · 07-13-2022, 01:38 AM

From doing some reading it may be the shift fork? I googled for parts and can’t find any. I know it’s a cg clone and Honda parts may work but I’m not 100% sure. I definitely need help from someone a little more mechanically inclined

buzz · 07-13-2022, 08:13 AM

Hello try CSC Motorcycles.

**JerryHawk250** · 07-13-2022, 08:45 AM

You can find all the parts for the TBR7 here. https://partskit.com/collections/tbr7

Mudflap · 07-13-2022, 09:38 AM

Sounds more like a shifting fork than a clutch. First thing though is a good check of the chain, sprockets, and engine mounts.

757nick · 07-13-2022, 12:37 PM

Quote:

Originally Posted by Mudflap

Sounds more like a shifting fork than a clutch. First thing though is a good check of the chain, sprockets, and engine mounts.

I can’t even find any videos on how to check or fix it! Any idea how to do it or what it looks like?

757nick · 07-13-2022, 01:53 PM

Quote:

Originally Posted by Mudflap

Sounds more like a shifting fork than a clutch. First thing though is a good check of the chain, sprockets, and engine mounts.

What would I be looking for if it was the chain or sprockets?

Mudflap · 07-13-2022, 02:16 PM

Quote:

Originally Posted by 757nick

What would I be looking for if it was the chain or sprockets?

Look for worn teeth on the sprockets, particularly the countershaft sprocket. They become shark fin shaped and the chain can slip. The chain really should be checked while setting on a bench by measuring the stretched out length against the pushed together length. Another more crude way is to pull the chain off the rear sprocket at the back and if you can see half a tooth under the chain plate it's likely worn out. I've also seen loose engine mount bolts that let the engine swing back when accelerating which makes the chain loose so it jumps teeth on the sprocket.

Shift fork damage is usually caused by stomping down or up hard on the shift lever but it takes a lot of force.

herbie · 07-13-2022, 09:47 AM

Quote:

Originally Posted by 757nick

My 2021 tbr7 has about 5k miles on it and Iv done all the valve adjustments and oil changes on time every time. If I’m at a complete stop I’ll take off and go to shift to 2nd gear and it will catch then slip into neutral then get stuck in neutral for a few seconds and let me go back up. It’s a new problem and I’m not sure what’s going on. I don’t have lose of power like it’s “slipping” . Any ideas on what it couod be and how to fix? thank you!

Just a thought, is your gear shift lever mounted to high in relation to the foot peg? Maybe your not able to pull it up far enough, you could try removing the shift lever and lowering it down a little and see if that helps. Did the shift lever possibly get bent?

757nick · 07-13-2022, 12:40 PM

Quote:

Originally Posted by herbie

Just a thought, is your gear shift lever mounted to high in relation to the foot peg? Maybe your not able to pull it up far enough, you could try removing the shift lever and lowering it down a little and see if that helps. Did the shift lever possibly get bent?

Oh yah it got bend and I replaced it with one that is very short it doesn’t come out that far to the left like the stock one did. It may have been hitting the bike when trying to shift. I ordered a new one and it will be in tomorrow

07-13-2022, 01:31 AM	#1
757nick Join Date: Nov 2021 Posts: 31	TBR7 clutch slipping? My 2021 tbr7 has about 5k miles on it and Iv done all the valve adjustments and oil changes on time every time. If I’m at a complete stop I’ll take off and go to shift to 2nd gear and it will catch then slip into neutral then get stuck in neutral for a few seconds and let me go back up. It’s a new problem and I’m not sure what’s going on. I don’t have lose of power like it’s “slipping” . Any ideas on what it couod be and how to fix? thank you! Last edited by 757nick; 07-13-2022 at 02:20 AM.
	0

07-13-2022, 08:45 AM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	You can find all the parts for the TBR7 here. https://partskit.com/collections/tbr7 __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

07-13-2022, 01:38 AM	#2
757nick Join Date: Nov 2021 Posts: 31	From doing some reading it may be the shift fork? I googled for parts and can’t find any. I know it’s a cg clone and Honda parts may work but I’m not 100% sure. I definitely need help from someone a little more mechanically inclined
	0

07-13-2022, 08:13 AM	#3
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 953	Hello try CSC Motorcycles.
	0

07-13-2022, 09:38 AM	#5
Mudflap Join Date: Sep 2014 Posts: 1,930	Sounds more like a shifting fork than a clutch. First thing though is a good check of the chain, sprockets, and engine mounts.
	0