TBR7 carb tuning?

Skateforlife6 · 05-01-2021, 12:47 AM

So I'm confused as to exactly what parts I need to buy. I just want to tune the stock carb when I get my bike. The only other mod I'll do is the airbox mod. So what will I need to do to the stock carb and where can I find the parts needed? Please try to be specific, I'm already confused. Thanks everyone.

gwowzer · 05-01-2021, 08:54 AM

You'll need a dremel with cutoff wheel, or a small hacksaw, a flathead screwdriver, a pilot jet, and a main jet. Jet kits can be found on Amazon. You'll also need one or two tiny brass washers from the hardware store to fit the needle. That should cover it.

TxTaoRider · 05-01-2021, 09:21 AM

What airbox mod are you doing on your TBR7? If it's the one that some do on the hawks, you'll find the tbr7 has a different snorkel thats larger than the hawks and made from rubber.

alex_in_az · 05-01-2021, 10:25 AM

Quote:

Originally Posted by TxTaoRider

What airbox mod are you doing on your TBR7? If it's the one that some do on the hawks, you'll find the tbr7 has a different snorkel thats larger than the hawks and made from rubber.

yup, TBR7 doesn't need the airbox mod

Skyd · 05-01-2021, 10:27 AM

you may need to shim the needle as well, but a small washer will do the trick

05-01-2021, 12:47 AM	#1
Skateforlife6 Join Date: Apr 2021 Posts: 3	TBR7 carb tuning? So I'm confused as to exactly what parts I need to buy. I just want to tune the stock carb when I get my bike. The only other mod I'll do is the airbox mod. So what will I need to do to the stock carb and where can I find the parts needed? Please try to be specific, I'm already confused. Thanks everyone.
	0

05-01-2021, 09:21 AM	#3
TxTaoRider Join Date: Oct 2020 Location: Flower Mound Texas Posts: 904	What airbox mod are you doing on your TBR7? If it's the one that some do on the hawks, you'll find the tbr7 has a different snorkel thats larger than the hawks and made from rubber. __________________ 2021 Tao Tbr7 - "Lucille" Mods so far- Brozz swingarm, 21" front rim (Bridgestone Tw302 rear/Dunlop D606 front tires), Digital gauge cluster, pz30b pumper carb, after market hand guards, aftermarket brake and clutch levers, round fold away mirrors, Fly handlebars shortened slightly, 13t front sprocket 2009 Q-link Legacy 250 1982 Suzuki GS1100ES - "Jolene"
	0

05-01-2021, 10:27 AM	#5
Skyd Join Date: Mar 2021 Location: New Hampshire Posts: 242	you may need to shim the needle as well, but a small washer will do the trick __________________ 2020 RPS Hawk 250 - Build thread can be found here: http://www.chinariders.net/showthread.php?t=28374 "Do Wheelies and Forget your Feelies" "If vegetarians eat vegetables, what do humanitarians eat?" -unknown
	0

05-01-2021, 08:54 AM	#2
gwowzer Join Date: Aug 2019 Location: Central Ohio Posts: 297	You'll need a dremel with cutoff wheel, or a small hacksaw, a flathead screwdriver, a pilot jet, and a main jet. Jet kits can be found on Amazon. You'll also need one or two tiny brass washers from the hardware store to fit the needle. That should cover it.
	0