|
![]() |
#1 |
Join Date: Aug 2021
Location: TX
Posts: 4
|
![]()
Hello
![]() ![]()
__________________
2020 Vitacci 250 GTO 2008 Suzuki GSXR 600 |
![]() |
![]() |
#2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,651
|
Welcome aboard! Make sure you are using the right spark plugs. I've heard from a few others with the same bike coming with the incorrect plug.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#3 |
Join Date: Aug 2021
Location: TX
Posts: 4
|
Thank you so much for responding! My dad suggested that as well. So I put in some new NGK CR8E plugs. Found them through some Google searching, and they were recommended. However I still have that issue
__________________
2020 Vitacci 250 GTO 2008 Suzuki GSXR 600 |
![]() |
![]() |
#4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,651
|
That is correct. It takes a NGK (1275) CR8E Standard Spark Plug.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 08-27-2021 at 09:08 AM. Reason: bad link |
![]() |
![]() |
#5 |
Join Date: Aug 2020
Location: Savannah, Ga
Posts: 759
|
if it's fuel injected, it shouldn't need a CDI. If it's the same cylinder, you more than likely have an internal problem. Try adjusting your valves. If that doesn't work, and you have access to a borescope, look inside the cylinder to check for problems. It's seems like you may have lost compression in one cylinder.
|
![]() |
![]() |
#6 |
Join Date: Aug 2021
Location: TX
Posts: 4
|
OK, thank you for confirming the correct spark plug. Also thank you for the info about the CDI, and that explains why I couldn't find anything like the boxes online mounted anywhere on the bike
![]()
__________________
2020 Vitacci 250 GTO 2008 Suzuki GSXR 600 |
![]() |
![]() |
#7 |
Join Date: Aug 2021
Location: TX
Posts: 4
|
Venom motorsports emailed me. Found the problem. One of the coil packs was wired wrong from the factory. It finally just burned out causing my recent issue. It also explains this weird electrical issue I was having
![]()
__________________
2020 Vitacci 250 GTO 2008 Suzuki GSXR 600 |
![]() |
![]() |
#8 |
Join Date: Sep 2023
Posts: 1
|
Are you still having the problem?
It might actually be the crank position sensor. I had a similar problem where one cylinder would not fire and occasionally not want to start but once running and driving it was somewhat fine. I check that the ignition signal wasn’t triggering on one output from the ecu and initially thought it was a bad ecu but the ecu can only fire if it knows where the crank is in it’s rotation and it was getting occasional bad signal. Swapped out the sensor and now it’s perfect. Before you spend any money on a problem be sure that is the problem or you will spend a lot of money replacing perfectly working components.
|
![]() |
|
![]() |
![]() |
Tags |
jonway, venom, vitacci, yy350-9a |
|
|