|
03-08-2014, 08:20 PM | #1 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
newbie and new to me
I just got a 2007 cool sports co200gy for 620 has 1900 miles the bike is in great shape never layed down I have to get a shift lever for it and get the rear blinkers fixed ( probably bulb)along with replace a front blinker cause its broken. I've read bout checking all the bolts and nuts on these anything else I should look for and where can I find the shift lever for my bike.
|
|
03-08-2014, 09:19 PM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Welcome. A shift lever should be easy to find. Xr200 part likely fit.
__________________
You meet the nicest people on a Honda Clone. |
|
03-08-2014, 09:58 PM | #3 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
I know it's the 163fml if it helps
|
|
03-09-2014, 09:36 AM | #4 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I may have a shift lever in a box of parts. Will look this afternoon if I remember.
__________________
You meet the nicest people on a Honda Clone. |
|
03-09-2014, 12:46 PM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Welcome!
If you end up buying a shift lever, make sure it's spring loaded to protect the shifter shaft.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-09-2014, 01:21 PM | #6 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
Can anyone send me a link of a shifter that'll fit cause I don't even know what original one looked like or does Iit not matter as long as its a 200cc
|
|
03-10-2014, 10:41 AM | #7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It matters if you have a shift linkage (which I doubt). If not, all Honda clones use the same shifter, AFAIK. It has a slight S-shape to it, which accomodates the fat stator cover, vs. the Honda XR200 shifter, which has a straight shifter.
I had a quick look on www.taobao.com, but I haven't found anything yet. Try searching under CB200.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-10-2014, 10:56 AM | #8 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I bet this one would be ideal: http://item.taobao.com/item.htm?spm=...id=20091016330
It is only $5.86 US plus shipping.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-10-2014, 11:43 AM | #9 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
So something like this http://www.motoparts-superstore.com/...kart-2254.html cause I ordered one like this http://m.ebay.com/itm/300859823972?nav=SEARCH
|
|
03-10-2014, 02:36 PM | #10 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Welcome; we are glad you joined us.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
03-11-2014, 08:09 AM | #11 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
Also can anyone find a pic or tell me where the idle screw is I already bookmarked page for c clip but can't find one for idle and can anyone tell me where I can get a owners manual for the lifan 163fml for free in pdf
|
|
03-11-2014, 12:37 PM | #12 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
For parts, try Hooper Imports...they specialize in Lifan parts which in 2007 was pretty much the model from which seemingly many of these bikes were made from, or these companies manufactured bikes for Lifan under contract and also sold them under their own name ; i.e. HiBird.
Www.hooperimports.com Also, because I have befriended them and they are a distributor with many Chinese contacts (besides just what they carry) is Excalibur Motorsports. www.atv4usa.com 909-591-8800 as well as a 1-800 number on their site somewhere...
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
03-13-2014, 08:41 AM | #13 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
Has anyone had to replace the bearings in the swing arm where bolt goes threw
|
|
03-13-2014, 09:07 AM | #14 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I haven't done it on a China bike yet, but I have changed the swingarm bushings on a China ATV. I found Yamaha bushings that were a perfect fit, much better quality and around $7.00 each. For the Win!
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-13-2014, 12:24 PM | #15 |
Join Date: Mar 2014
Location: keene nh
Posts: 206
|
Is it difficult to replace I'm not worried bout taking swing arm off just replacing them as I'd imagine there pressed in
|
|
|
|
|
|