|
|||||||
|
|
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
|
|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
04-14-2022, 12:23 PM
|
#1 |
Join Date: Mar 2022
Location: Off-Grid/Instagram
Posts: 21
|
I found an aluminum intake that fits my Lifan X-Pect!!!
I found all the parts on Amazon and I didn't have to modify any of the exterior panels. I did have to use an oversized Spectre Pre-Filter to cover the intake and provide a double layer of Pre-Filter to zip-tie around the Crankcase Vent. Though it's good for keeping moisture out and keeping the K&N Filter clean. The factory airbox still supports all the attached modules and acts as a rear fender and rear shock guard. A few careful minutes with an oscillating saw and a sanding dremel and I was able give the intake filter a good bit of splash protection and keep the pre-filter over both the intake and the crankcase vent. I'll upload all the pics including part numbers by replying to this post.
|
|
|
04-14-2022, 12:26 PM
|
#2 |
|
Join Date: Mar 2022
Location: Off-Grid/Instagram
Posts: 21
|
The rest of the pics of the finished install.
The exterior panels fit back over it comfortably and the crankcase vent has a double layed pre-screen cover zip-tied around it too!!!
Last edited by GamingRAPTRcom; 04-14-2022 at 01:50 PM. |
|
|
|
04-14-2022, 12:36 PM
|
#3 |
|
Join Date: Mar 2022
Location: Off-Grid/Instagram
Posts: 21
|
The parts list and they're all on Amazon.
(1) Chrome Intake
(2) K&N Filter (3) Spectre Pre-Filter (4) Extended Silicone Intake Coupler to move the intake past the rear shock cover portion of the airbox. All these come together beautifully to protect the intake and the crankcase much better than a paper filter.
|
|
|
|
04-14-2022, 02:09 PM
|
#4 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,110
|
Nice, it sits in there quite well too. I would almost bet if you had enough gumption you could modify it enough to seal off the airbox as well.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
04-14-2022, 03:30 PM
|
#5 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,112
|
Super clean. I like it!
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
|
|
|
04-14-2022, 06:53 PM
|
#6 |
|
Join Date: Sep 2021
Location: De Soto, MO
Posts: 1,976
|
Great work, and thanks for including the links to the parts!
__________________
2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself |
|
|
|
04-14-2022, 09:00 PM
|
#7 |
|
Join Date: Dec 2019
Posts: 77
|
Is there anyway to program these lifan ecus so they don't run lean when you modify them?
|
|
|
|
04-14-2022, 09:39 PM
|
#8 | |
|
Join Date: Sep 2021
Location: De Soto, MO
Posts: 1,976
|
Quote:
__________________
2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself |
|
|
|
|
|
|
|
| Tags |
| gamingraptrcom, lifan, xpect |
|
|
Hybrid Mode
