Something else to check, Ho Hum

HotelRed · 09-09-2009, 11:58 PM

:roll:

See the tear in the air box tube? That's not the only one. Got another up by the carb.

I'm looking for filters for these things now. Tried a UNI but the choke lever gets in the way.

John

Weldangrind · 09-10-2009, 02:43 AM

Which Uni did you try?

TurboT · 09-10-2009, 03:16 AM

Forgive me for being ignorant, but why does the choke lever get in the way? It appears you've built a snorkel, do you not put the air filter at the end of the snorkel?? I'm a bit confused.

katoranger · 09-10-2009, 08:17 AM

The kazuma came with athe same filter setup. It was torn like that too. I had not problems with the UNI knockoff filter I put on it.

Allen

Cal25 · 09-10-2009, 09:05 AM

You can get a filter with an angeled mount. It will allow you to rotate the element away from interferance points.

HotelRed · 09-10-2009, 10:10 AM

Thanks for the replies.

Weldgrinder: It is actually a knockoff. You can see it on the right step under the roll of tape. I got it to check the fit on the kids various quads/bikes.

TurboT: The chock lever/mount is on the right side of the carb and protrudes to the rear of the carb far enough that it prevents the filter from fully seating on the carb flange. I have to throw away the snorkle cuz it can't be fixed & I can't find another.

Katoranger: Which filter did you use? Can you tell me where you got it?

Cal25: Great idea! Thanks. I been looking at them for my Roketa 200 bike but did not think of the quads at the time. Brain farts are sometimes a result of oldtimers disease.

Thanks again.
John

Weldangrind · 09-10-2009, 12:24 PM

A 15 degree filter might solve your problem, but can you trim or bend the choke lever to suit the existing Uni?

HotelRed · 09-10-2009, 07:18 PM

Won't work. I looked at it & there is no way to move the choke thing out of the way.
The bent filter will work tho. Thanks.

AZ200cc · 09-11-2009, 02:23 AM

Maybe just buy a length of flex hose and make back like it was. Or a short section of hose to move the Uni back might work.

09-09-2009, 11:58 PM	#1
HotelRed Join Date: Jul 2006 Location: Payson, AZ Posts: 53	Something else to check, Ho Hum :roll: See the tear in the air box tube? That's not the only one. Got another up by the carb. I'm looking for filters for these things now. Tried a UNI but the choke lever gets in the way. John
	0

09-10-2009, 02:43 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Which Uni did you try? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

09-10-2009, 08:17 AM	#4
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	The kazuma came with athe same filter setup. It was torn like that too. I had not problems with the UNI knockoff filter I put on it. Allen __________________ You meet the nicest people on a Honda Clone.
	0

09-10-2009, 12:24 PM	#7
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	A 15 degree filter might solve your problem, but can you trim or bend the choke lever to suit the existing Uni? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

09-11-2009, 02:23 AM	#9
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Maybe just buy a length of flex hose and make back like it was. Or a short section of hose to move the Uni back might work. __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

09-10-2009, 03:16 AM	#3
TurboT Join Date: Sep 2008 Location: Surrey, B.C., Canada Posts: 2,185	Forgive me for being ignorant, but why does the choke lever get in the way? It appears you've built a snorkel, do you not put the air filter at the end of the snorkel?? I'm a bit confused.
	0

09-10-2009, 09:05 AM	#5
Cal25 Join Date: Feb 2008 Location: Terrell and Grapevine Tx. Posts: 1,585	You can get a filter with an angeled mount. It will allow you to rotate the element away from interferance points.
	0

09-10-2009, 10:10 AM	#6
HotelRed Join Date: Jul 2006 Location: Payson, AZ Posts: 53	Thanks for the replies. Weldgrinder: It is actually a knockoff. You can see it on the right step under the roll of tape. I got it to check the fit on the kids various quads/bikes. TurboT: The chock lever/mount is on the right side of the carb and protrudes to the rear of the carb far enough that it prevents the filter from fully seating on the carb flange. I have to throw away the snorkle cuz it can't be fixed & I can't find another. Katoranger: Which filter did you use? Can you tell me where you got it? Cal25: Great idea! Thanks. I been looking at them for my Roketa 200 bike but did not think of the quads at the time. Brain farts are sometimes a result of oldtimers disease. Thanks again. John
	0

09-10-2009, 07:18 PM	#8
HotelRed Join Date: Jul 2006 Location: Payson, AZ Posts: 53	Won't work. I looked at it & there is no way to move the choke thing out of the way. The bent filter will work tho. Thanks.
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode