|
![]() |
#1 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
2020 hawk deluxe
Runs good but sometimes when cold it hesitates and when it’s warm sitting at a idle and when I hit the throttle it cuts off , I did valves did not solve the problem, might do them again
Last edited by weiser23; 06-29-2021 at 10:03 PM. |
![]() |
![]() |
#2 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
Any ideas what could be causing this, I thought efi would solve the hesitations and stalling issues
|
![]() |
![]() |
#3 |
Join Date: May 2021
Posts: 312
|
How many miles do you have on it? Mine kinda does the same thing and only 20 miles.
|
![]() |
![]() |
#4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,578
|
It might takes some miles for the ECU to learn. Give it some time.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#5 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
100 miles
|
![]() |
![]() |
#6 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
I tightened back wheel to 69 foot lb and wheel seems to have drag on it does yours have drag
|
![]() |
![]() |
#7 |
Join Date: May 2021
Posts: 312
|
Hi, no just checked this morning. My torque on the bolt is 65 and I don't think 69 would make a drag. How's your chain tension?
|
![]() |
![]() |
#8 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
Chain is good ,,,from what I saw it is supposed to be 68.59 I rounded to 69 foot lbs
|
![]() |
![]() |
#9 |
Join Date: May 2021
Posts: 312
|
My manual says torque 65 ft lbs on rear axle 45 on front.
|
![]() |
![]() |
#10 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
You are right I
Got the information from this forum but it really didn’t make a difference |
![]() |
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|