|
08-22-2013, 08:27 PM | #1 |
Join Date: Aug 2012
Posts: 18
|
Carb jet question - TaoTao
This question got buried too deep in my last post, so here goes:
I bought a "TaoTao" 24mm carb and wondering if anyone knows what kind of jets this takes or what this carb is a copy of ? |
|
08-22-2013, 09:41 PM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Sorry, not a clue. I recommend that you remove the jets and compare them with pics on www.jetsrus.com
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-23-2013, 11:36 PM | #3 |
Join Date: Aug 2012
Posts: 18
|
After checking jetsrus, it looks like Keihin parts will work. For the carb we have, the mainjet matches to #99101-116. The installed jet is a #74
The slow jet best matches the Keihin "3J", and is a #K32 the overall length is about 1mm less on the Kiehin part, but I don't think that will affect anything. |
|
08-25-2013, 12:38 PM | #4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
As long as the seating surface to the the tip of the emulsion tube is the same length and diameter, my guess is that there would be no difference. Now that you have a baseline, you might find the jets cheaper on eBay, perhaps even an assorted pack.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|