Vitacci Tank 200 EFI Deluxe

[danklyrides]

I searched for a high-flow alternative for the stock paper air filter but I wasn't able to find one that fits in the Tank air box. So back to AliExpress!!

Intake kit
Coupling
Filter

I had to compress the aluminum intake tube about 5mm to fit nicely under the engine pivot cross bar (red arrow in picture). I just squeezed it in my bench vise.

I wanted to keep the evap system and crankcase vent functioning so I drilled a hole in the tube and used a tire valve stem as a fitting (green arrow in picture). I like the way it came out.

I took it for a 30 mile ride and it is running great! I'm very pleased with it and think I am done with performance related modifications. Just to be clear, I didn't NEED to do any of this but I really enjoy tinkering and it is really affordable on a GY6.

The last pic is my temporary solution for the transmission vent tube. The little stick on holder that will keep it up and out of the way for now

I think the next thing I will look at modifying is the suspension. The rear shocks could definitely be better

Cheers!
Dankly