Mikuni Carb on Rhino... how do I mount this thing?

[Yakpimp]

Originally Posted by dirtbkr188

The correct way to measure a cable is to measure the total length of the inner wire cable and also measure the length of the outer sheath. If the outer length you have is fine, you'll want to add 1 inch to the length of the inner wire and then shop around. It will have to be ATV-specific if you have a thumb throttle.


Click HERE to get an idea of what to look for when browsing for a cable. The cable shown is 31" overall, and has a 27" outer sheath


Ideally, you'll want a throttle cable with an adjustment fitting inline, for fine tuning the setting.

I went back and took a look again because I wasn't convinced after looking around online that 3" was not enough. With the inline adjustment all the way closed I was able to get it to work. Just spent 15 minutes playing with the adjustment screws and I think I got it dialed in to where it feels pretty smooth. Still a little clunky feeling, but good enough for what I need right now.

Once I get a bit more time I'll try adjusting again, but I think my neighbors were probably getting annoyed at me ripping up and down the driveway over and over

Thanks for all the help. Next on to the handbrakes!