Just got a XPro Templar 250X - Page 2

BlueJayMoto · 08-28-2024, 09:00 PM

Hello,

I see you have all been have a good talk about my issue and then some of what should be done.

Well here is a some what update:
I have been riding the bike just the way it came in the box and yes I think the jets and the needle needs to be swapped out, if and or when that get here. It would seem my set had to take a trip around the US before passing my door (town) and go to the next town over then to be here the next day or so.

As well I need to look into why the carburetor is now puking fuel out of the bowl overflow tube and/or drain tube. This is happening when the bike is running and shut off. So (my suspicion is the float has sunk and has a hole in it) however it could be trash in there or who knows at this point.
&& to make matters a little bit worse I hear a weird rattle/tinging noise when I start hitting over 3000-4000 RPMs but after that it goes away and the sound seems to be coming from inside the transmission case or lower end.
yes I changed the original oil that came with it before starting to ride and I looked on the dipstick LVL is good and I do not see any silvery bits and the oil is not shiny but I will be draining it replacing it with a thicker oil like 10w40 due to I'm running 10w30 seeing to as that is what I had at the time on hand.

I will come back and update this post as time goes on and I get to work on the bike.

up-to-date pic of the bike: https://imgur.com/a/4SO61xO

Thumper · 08-29-2024, 01:13 AM

The float bowl drain screw is probably loose, or the o-ring on it is damaged. If tightening that float bowl drain doesn't fix the leak, take it out and inspect the o-ring.

BlueJayMoto · 08-29-2024, 10:36 PM

Quote:

Originally Posted by Thumper

The float bowl drain screw is probably loose, or the o-ring on it is damaged. If tightening that float bowl drain doesn't fix the leak, take it out and inspect the o-ring.

I was thinking that just after I made my post because my brother thought it had something to do with the idle and I told him no it didn't. However I go out and turn the gas on with no leak go and ride for a bit no leak.

but I am taking it apart anyways to jet it. so just add it to the to-do-list

08-28-2024, 09:00 PM	#16
BlueJayMoto Join Date: Aug 2024 Posts: 8	Hello, I see you have all been have a good talk about my issue and then some of what should be done. Well here is a some what update: I have been riding the bike just the way it came in the box and yes I think the jets and the needle needs to be swapped out, if and or when that get here. It would seem my set had to take a trip around the US before passing my door (town) and go to the next town over then to be here the next day or so. As well I need to look into why the carburetor is now puking fuel out of the bowl overflow tube and/or drain tube. This is happening when the bike is running and shut off. So (my suspicion is the float has sunk and has a hole in it) however it could be trash in there or who knows at this point. && to make matters a little bit worse I hear a weird rattle/tinging noise when I start hitting over 3000-4000 RPMs but after that it goes away and the sound seems to be coming from inside the transmission case or lower end. yes I changed the original oil that came with it before starting to ride and I looked on the dipstick LVL is good and I do not see any silvery bits and the oil is not shiny but I will be draining it replacing it with a thicker oil like 10w40 due to I'm running 10w30 seeing to as that is what I had at the time on hand. I will come back and update this post as time goes on and I get to work on the bike. up-to-date pic of the bike: https://imgur.com/a/4SO61xO __________________
	1

08-29-2024, 01:13 AM	#17
Thumper Join Date: Feb 2021 Location: Kansas City Posts: 2,738	The float bowl drain screw is probably loose, or the o-ring on it is damaged. If tightening that float bowl drain doesn't fix the leak, take it out and inspect the o-ring. __________________ No matter where you go, there you are
	1