X-Pro Paladin 300 Resource Guide - Page 3

Dirtbike2025 · Today, 02:49 PM

@mumen- the bad model is 1.2 inches lower than the x model and the guy is 5”7 I am 5”10.

@ thumper- can you take a video of you sitting on the bike and adjust the pre load to soft so we can see the height and how close you are from flat foot?

I don’t understand people have this bike but they are posting NO videos and very little information..: POST VIDEOS for the community

Mumen Rider · Today, 03:20 PM

Quote:

Originally Posted by Dirtbike2025

I don’t understand people have this bike but they are posting NO videos and very little information..: POST VIDEOS for the community

No information? This whole thread is packed with it. Same goes for the other thread detailing assembly. What a bad take. At 5'10" you won't be flat footing the Paladin.

onthefly · Today, 03:23 PM

There are a few videos on YouTube. I believe only 4-5 members have the bike including myself( at least the ones that are posting about it). I just got mine assembled yesterday. A couple other members are assembling and/or waiting for parts. Videos will come.

Mumen Rider · Today, 04:44 PM

22mm KTM front disc guard fits.
https://www.aliexpress.us/item/3256806381706662.html?

KTM wheel spacers fit.

KTM Brembo front calipers fit. It's a wide range of models and years(~20 years).

Dirtbike2025 · Today, 05:57 PM

I don’t mean full flat foot but at least both feet down and not on tipy toes

Dirtbike2025 · Today, 05:59 PM

Videos can be posted without parts arriving. One guy posted 4 videos on YouTube of a walk around video. It doesn’t take 5 minutes to go out in garage and record sitting on the bike and adjusting the suspension sag/dial. It takes a LOT more time to fully assemble the bike than post a video

Mumen Rider · Today, 06:11 PM

That person was me and I won't be doing what you're asking because you're kind of an ass. It's not hard to figure out by looking at the seat height and your inseam that you WON'T be flat footing it but you're like some kind of nagging child bugging out about it. You must not have any experience with motorcycles.

onthefly · Today, 06:50 PM

Hey guys, what is this part for? I don't think I saw it being installed in the xpro video. TIA!

Dirtbike2025 · Today, 07:10 PM

Magnum you must me a Kamala voter getting into your feelings. Stop telling me to to look at the seat and see how tall it is. I understand it’s a tall seat height. I was simply asking for a video for comparison between the different suspension settings was all. You are supposed to be contributing to the community but yet your in feelings because your ex wife cheated on your redneck ass. Go to the gym and workout get rid of that beer gut and stop crushing beer cans on your forehead

Today, 06:50 PM	#38
onthefly Join Date: May 2018 Posts: 50	Part indentification Hey guys, what is this part for? I don't think I saw it being installed in the xpro video. TIA! Attached Thumbnails
	0

Today, 02:49 PM	#31
Dirtbike2025 Join Date: Nov 2024 Posts: 9	@mumen- the bad model is 1.2 inches lower than the x model and the guy is 5”7 I am 5”10. @ thumper- can you take a video of you sitting on the bike and adjust the pre load to soft so we can see the height and how close you are from flat foot? I don’t understand people have this bike but they are posting NO videos and very little information..: POST VIDEOS for the community
	0

Today, 03:23 PM	#33
onthefly Join Date: May 2018 Posts: 50	There are a few videos on YouTube. I believe only 4-5 members have the bike including myself( at least the ones that are posting about it). I just got mine assembled yesterday. A couple other members are assembling and/or waiting for parts. Videos will come.
	1

Today, 04:44 PM	#34
Mumen Rider Join Date: May 2024 Location: Florida Posts: 125	22mm KTM front disc guard fits. https://www.aliexpress.us/item/3256806381706662.html? KTM wheel spacers fit. KTM Brembo front calipers fit. It's a wide range of models and years(~20 years).
	1

Today, 05:57 PM	#35
Dirtbike2025 Join Date: Nov 2024 Posts: 9	I don’t mean full flat foot but at least both feet down and not on tipy toes
	1

Today, 05:59 PM	#36
Dirtbike2025 Join Date: Nov 2024 Posts: 9	Videos can be posted without parts arriving. One guy posted 4 videos on YouTube of a walk around video. It doesn’t take 5 minutes to go out in garage and record sitting on the bike and adjusting the suspension sag/dial. It takes a LOT more time to fully assemble the bike than post a video
	0

Today, 06:11 PM	#37
Mumen Rider Join Date: May 2024 Location: Florida Posts: 125	That person was me and I won't be doing what you're asking because you're kind of an ass. It's not hard to figure out by looking at the seat height and your inseam that you WON'T be flat footing it but you're like some kind of nagging child bugging out about it. You must not have any experience with motorcycles.
	1

Today, 07:10 PM	#39
Dirtbike2025 Join Date: Nov 2024 Posts: 9	Magnum you must me a Kamala voter getting into your feelings. Stop telling me to to look at the seat and see how tall it is. I understand it’s a tall seat height. I was simply asking for a video for comparison between the different suspension settings was all. You are supposed to be contributing to the community but yet your in feelings because your ex wife cheated on your redneck ass. Go to the gym and workout get rid of that beer gut and stop crushing beer cans on your forehead
	0