|
![]() |
#1 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,661
|
I'm in the process of building a combination power trim/jack plate for the little engine. You can buy them already made but cost almost as much as the motor. I'm not spending over $850 for something i can fab myself. A friend of mine owns a fab shop and gave me some scrap pieces of 4 x 4 angle and 1/4" aluminum plate. I fabricated everything up Sunday afternoon since I couldn't go fishing because of he rain. This only took me an hour to put together. I needed to put it together before I could order the actuator as i didn't know the exact length i would need. I knew it would be between 4-6". It turned out that i would only need it to have 4" of travel. The actuator should arrive tomorrow so I should have it ready for the weekend to test out. Here's the actuator I ordered. https://amzn.to/4cHCSyz
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
|
![]() |
![]() |
|
|