Quote:
Originally Posted by SpudRider
If you didn't measure the amount of oil, that's the problem, Tony. If you fill the oil to the proper level in the sight glass, then start the engine, the oil will be distributed to the nooks and crannies of the engine. Also, if you install a new oil filter, some of the oil will be distributed to that area. Therefore, you need to fill the oil to the appropriate level in the sight glass once again, run the engine, and keep doing so until the oil level returns to the proper level within a few minutes.
I simplify the process by measuring 1.7 quarts (55 ounces) of oil to add to the engine. Using this method, I know I have the correct quantity of oil. Of course, I verify the oil level is correct after running the engine, and checking the oil level in the sight glass.
|
Well, ok then. I'll be adding oil again tomorrow, but I believe I have around 1.5-1.7 in it now. If you dump all 55 ounces in, the oil will go above the fill line, correct?