Quote:
Originally Posted by hect75
The stripped bolts are those holding the carb bowl. I used the dremel and flat screwdriver to take them off. I removed the main jet and took it to the shop but nobody sells this guy. On the other hand, Honda (according to Spud's suggestion) sells the oil seal fork for $30 each one which I think is very expensive. Is there another model or what about the seals that use the TW200? maybe they're cheaper than the Honda ones.
|
Your Zongshen forks are very different from Yamaha TW200 forks. Therefore, you can't use TW200, fork oil seals.
As I documented in my fork oil thread, the Zongshen, fork oil seals have the following dimensions.
http://www.chinariders.net/showthread.php?t=10266
Outside diameter: 50 mm
Inside diameter: 37 mm
Thickness: 11 mm
Besides getting the fork oil seals for the '09 Honda CRF150R, you can also purchase the Zongshen, fork oil seals from Taobao.
As I detailed in my carburetor jet thread, you Teikei MV28 carburetor can use Mikuni N102/221, main jets, which you can purchase from Rocky Mountain ATV.
http://www.chinariders.net/showthread.php?t=6501
http://www.rockymountainatvmc.com/p/...in%20jet%20150
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894