2022 Icebear Champion 125 , green , in CT
Throwing it out there in case anyone wants one .
Basically new with 51 miles ( will go up as I ride ) . Already did the 2 known essential upgrade / fixes , the carburetor and Delrin rear swing arm bushings . Runs absolutely awesome now with the VM26 carb , starts right up even without the choke !!! Rear swing arm tight like a drum now !!! NO wiggle !!! Also has fuel filters in both gas lines . The factory oil has been out since day one and replaced with quality oil . The honest reason for sale is I am used to driving manual clutch motorcycles , so the semi auto is awkward for me . The bike also will come with new , not installed Shinko SR426 120/90/10 tires and new tubes , and the "Honda " decal for the tank to really complete that CT70 clone !!! Here is the breakdown of what I have total into the bike : 1) Bike - $1,850 ( extra freight surcharge and assembled , bought it local like this ) 2) Carb - $60 3) Bushings $20 4) Tires - $135 5) Tubes $25 6) Decal - $15 For a total of $2,105 . Yes , I know you see them for $1,499 , but if you are on the East Coast you will pay another $100 for the freight surcharge , NTM Cajun shows late Oct / early Nov for these . You can have it now , assembled , shake down miles that shows you got a good one , no risk of coming in damaged / won't run , known issues done , and the cool extra parts . $1,750 I'm torn cause I really do like it but could care either way if I sell it . Pics to follow . |
Can’t upload pics from my phone , files to large ,, gonna have to go the old fashioned route from my camera , next day or do .
|
5 Attachment(s)
pics....
|
3 Attachment(s)
more...
|
Today's therapy session.
How will you feel when it's gone? What will you replace it with? Will you wish you had the Champion too? |
2 Attachment(s)
Quote:
2) Don't know , will wait til next spring to think of something else . I am not without , I still have a bike to ride , really nice original 95 Kawasaki KE100 ( hence why I mentioned the semi being awkward ) . That's why it doesn't phase to sell or keep the Champion . 3) If I get the itch for another CT70 clone , I'll get the Amigo for the manual clutch . here's the Kawi |
That's a sweet little 100! :tup:
|
My hope is that the Champion will not sell at all, and you realize the best thing to do is sell the stock motor and drop in the 190cc or 212cc 5-speed.
https://www.cajunmaddogs.com/monkey-series?page=2 You're welcome. |
Quote:
|
Was the Skyteam a manual clutch? Because I was wondering if the Champion was a rebranded Skyteam.
|
All of the above I believe share a lot of the same parts , the various distributors buy from the parts manufacturer ( frame / tires / rims / etc ) and then change colors , names , etc . Just like the Chinese auto lifts , a lot are exactly the same , just different name/model
|
Quote:
Quote:
|
The Icebear and Amigo both suffer the sloppy rear swing arm bushing and crappy “lean” carburetor. I do notice the rear shocks on the Amigo are different from the Icebear .
|
It wouldn't surprise me if there is only one location in China that stamps out all the CT70 clone frames.
|
Bump ,...... $1750
|
If I was on or near the east coast I would totally grab that. GLWS.
|
bump ... $ 1,650
|
All times are GMT -4. The time now is 07:14 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.