ChinaRiders Forums

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   ATVs (http://www.chinariders.net/forumdisplay.php?f=102)
-   -   Apollo Blazer 9 125cc atv (http://www.chinariders.net/showthread.php?t=20623)

PANDEMIC 02-11-2018 05:10 PM

...
 
...

Adjuster 02-11-2018 05:20 PM

Very nice looking bike.




/

PANDEMIC 02-11-2018 06:53 PM

...

Adjuster 02-11-2018 07:00 PM

Make sure to get us some video of all the excitement!



/

PANDEMIC 02-11-2018 07:22 PM

...

david3921 02-12-2018 08:59 PM

I got my Rhino and grandson's 125 from Birdy's and everything went smooth also. That Blazer looks great.

Please tell us more about this statement;

"...I really like the new speedo, tac, and gear indicator it comes with"

What ATV are you referring to?

PANDEMIC 02-12-2018 09:16 PM

...

goldstryker88 02-12-2018 09:57 PM

Interesting options! Might be able to plug and play with our versions.

david3921 02-13-2018 07:08 PM

Thanks for the link and info, PANDEMIC.

PANDEMIC 02-13-2018 07:27 PM

...

PANDEMIC 02-13-2018 07:31 PM

...

david3921 02-13-2018 11:30 PM

I got mine in June of '16. I just checked my emails and it shows that I ordered them on 6/1. My delivery paperwork shows the BOL # date of 6/2 and it was delivered to my address, in front of my garage, on 6/6. I went through the Indianapolis, Indiana store as they were the closest to me here in Michigan. It was $318 for shipping. I would have driven to pick them up and saved the shipping cost but my trailer isn't large enough.

PANDEMIC 02-14-2018 08:50 AM

...

david3921 02-14-2018 10:07 PM

Well, I hope it gets there in time. It looks like a great machine and I'm sure your daughter will be thrilled to get it.

PANDEMIC 02-21-2018 10:03 AM

...

JerryHawk250 02-21-2018 10:18 AM

That was awesome! :tup:

Weldangrind 02-21-2018 11:51 AM

Thanks for sharing that! Made my day. :D

PANDEMIC 02-23-2018 12:31 PM

...

JerryHawk250 02-23-2018 01:13 PM

Quote:

Originally Posted by PANDEMIC (Post 273974)
How much low-end torque will she gain if I swap out the front sprocket to the 11 tooth from the 12 tooth that came on it? I do not want to have to cut her chain guard off. But it struggles to make it up to my driveway.

It sure would help on the low end. How much? not sure but will be better.

PANDEMIC 02-23-2018 08:35 PM

...

letsride 02-23-2018 09:21 PM

Quote:

Originally Posted by PANDEMIC (Post 273988)
any clue how to fix the rear disc brake squeal?? will it go away with use???

Awesome thanks for posting the video! As far as the brake squeal. A lot of these Chinese bike's brake pads don't have the anti squeal plate on attached to the back of the pads backing plate. Try going to an auto parts store and picking up a little packet of disk brake pad lubricant. They usually have it on a rack up by the registers. Then remove the brake caliper, pop the brake pads out and put the lubricant on the back of the pads. The side OPPOSITE of the brake rotor.

david3921 02-23-2018 09:55 PM

I've been able to get rid of some squeals by using a pencil on the rotor. Draw waves on both sides of the rotor with the softest pencil you have. Just brake normally after.

Unless you have a very steep driveway, 125cc is plenty. Do you have the throttle limiter applied?

PANDEMIC 02-24-2018 12:46 PM

...

letsride 02-24-2018 02:06 PM

The quad will still pick up momentum and go pretty fast with limited throttle travel (which is all the screw does). You are correct with the screw out it just gets up there quicker. My son's 110 quad was scary fast as small as it was!

PANDEMIC 02-24-2018 05:50 PM

...

Weldangrind 02-26-2018 10:25 AM

Alaina is doing very well! I particularly liked her application of reverse.
Perhaps the throttle limiter screw isn't quite long enough to limit the throttle as much as you'd like. Does it feel like the throttle is barely opening?

PANDEMIC 02-26-2018 06:54 PM

...

Douglass 03-04-2018 12:29 PM

Quote:

also fixed the squeal
what was the problem?


All times are GMT -4. The time now is 06:44 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.