Hawk TT250 Exhaust $99.99
Hawk 250, TT250, Enforcer, Shark exhaust. $99.99 If your looking for one now is the time to get it. Lowest I have seen it. In the US so you should get it quick. https://www.ebay.com/itm/ALUMINUM-EX...53.m1438.l2649
|
Quote:
|
Quote:
|
I just ordered this 99.99 free ship from Kentucky
http://www.ebay.com/itm/221555825077 |
Thanks for sharing this JerryHawk250. Do you know if this exhaust bolts up and fits perfectly on the Hawk 250, or does it require minor modifications to make it fit? Thanks!!
|
Quote:
|
Quote:
|
Nice find! I just picked the same one up for $105; I love it! Despite the good reviews, STILL better quality than I expected.
I strongly suggest slotting the holes instead of using a .5" bit; it's just easier. The only problem I had was the midpipe's nut, which had welding slop in the threads. Snapped it off and put my own in, easy peasy. |
:wtf:FYI the Titanium Color is $92.40 right now. https://www.ebay.com/itm/Full-Steel-....c100005.m1851
Edit: Drastic price increase $230.99 Free shipping |
Disclaimer: Fitment results WILL vary lol.
Good find. Even when there aren't prices like this, if you do a bit of digging you can usually find a seller that has them for less than $120. I got mine for $108 with free shipping from California. |
Hawk Exhaust
3 Attachment(s)
Wow! I got my exhaust installed and I love it! It really opened her up! I took some temp readings before I removed my de-cat OEM exhaust. at the header I was getting readings of about 690 degrees. At the first bend it was about 250 degrees. That pipe held allot of heat right at the connection. At the air box I was getting readings of about 260 degrees right below the air box at the pipe. Right after the air box on the pipe it was about 280 degrees. At the stock OEM pipe itself I was getting readings of about 150-180 degrees. Now, for the new pipe. At the header on the new pipe, the readings are about 300-343 degrees. With my heat shield in place right below the air box my readings are 143-173 degrees. I can pretty much touch the top of the heat shield without it being too hot. I mounted my pipe at the lowest I could go to give clearance to the air box. The heat shield is not touching the air box. At the pipe its about the same at 150 degrees. The diamond bits helped with enlarging the header flange holes. That took some work.
|
Quote:
|
2 Attachment(s)
Quote:
|
1 Attachment(s)
Quote:
not exactly finished yet with the install. I'm going to weld up a few pieces to strengthen the pipe position and mounting flanges for the original exhaust plastic cover. |
1 Attachment(s)
Quote:
|
I like the head shield. I just used some good titanium DEI header wrap with a heavy overlap from flange to just a few inches before the muffler wrapped back to front. Still holding up after a full season of riding, and it made a huge difference on radiant heat. Not only radiant heat and reduced burn chance on my person, but the surrounding parts of the bike as well.
|
3 Attachment(s)
Quote:
|
Quote:
|
Nice job. :tup:
|
Quote:
|
That will do musictrek. Fine attention to detail! Making a sleeper if I do say so:clap: always cool to see what folks come up with on this site
|
Quote:
|
Quote:
|
1 Attachment(s)
Quote:
|
If that's the case I really need to get one soon. Always like more power. Lol
|
Quote:
|
Quote:
|
2 Attachment(s)
Quote:
|
3 Attachment(s)
Quote:
|
2 Attachment(s)
Quote:
|
2 Attachment(s)
Quote:
|
1 Attachment(s)
Quote:
|
1 Attachment(s)
Quote:
|
Nice job. I would done ther same. I'm OCD lol. Looks much better. :)
|
cant leave well enough alone. looks even better!!!
is that the xl size burrito tube or the regular (i believe there are 2 sizes). it looks like factory. you're having too much fun :clap: |
Quote:
|
1 Attachment(s)
Quote:
|
I got mine tuesday installed on my hawk today. Other than drilling the holes through the flange bigger it was easy. I only had a 3/8s drill bit and had to use the dremel to grind out the holes a bit. Everything else went on without a hitch. went with a 120 main jet and it feels a bit faster and sounds GREAT!!!!!!!!!!!!
|
Got a notification from Ebay this morning. $68.58. That's almost to good to pass up. https://www.ebay.com/itm/44cm-Alumin...YAAOSw~3paca4n
|
Hello Amazon has them for $65.00,and it fit perfect
|
All times are GMT -4. The time now is 06:14 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.