ChinaRiders Forums
Page 4 of 6 « First 23 4 56
Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   ATVs (http://www.chinariders.net/forumdisplay.php?f=102)
-   -   Yamoto gearbox w reverse (http://www.chinariders.net/showthread.php?t=10255)

TCCKSR 03-18-2012 03:55 PM
I've got an older Century MIG welder and use the shielding gas. Way nicer to work with and way cleaner welds (I need that as I am not a pro welder like CrazyglueNDfile is. :D )

Spend the few extra dollars whenever you buy a welder and get one that you can change the polarity to weld aluminum, uses sheilding gas and that you can use as 110v or 220v.

Weldangrind 03-18-2012 08:55 PM
Re: John Deere GT 235
 
Quote:
Originally Posted by Bubbaz
Quote:
Originally Posted by Bubbaz

This was after My daughter and I replaced the engine...She was alot of help..... Had to replace the engine due to a leaky oil cooler line that pumped out most of the oil when my mother was using it....Moms quote from the phone call I received at school.....Ahh Jim this mower started to smoke then started to shoot oil out the right side of the motor then sounded funny..so I tried to get it back up to the house but it finally quit....My reply.....Ahh nice Ill get it when i get home....I guess this was payback when I was a kid and always breaking there stuff....LOL
I appreciate willing young helpers (or willing old helpers for that matter :lol: ). Bummer about the cooler line, but at least you found a replacement engine.

Weldangrind 03-18-2012 08:56 PM
Quote:
Originally Posted by TCCKSR
I've got an older Century MIG welder and use the shielding gas. Way nicer to work with and way cleaner welds (I need that as I am not a pro welder like CrazyglueNDfile is. :D )

Spend the few extra dollars whenever you buy a welder and get one that you can change the polarity to weld aluminum, uses sheilding gas and that you can use as 110v or 220v.
I'm not a pro, just a hack. I am becoming a pretty good grinder, though. :lol:

Bubbaz 03-18-2012 10:06 PM
Ahh man.....Ok Got the welder out after a 40 mile ride on the DR this evening.....it works....it splatters...lol...it didnt stick together...lol...I think I need to play with this thing more....tried using the adjustments on the inside panel.....oh well Im learning.....adjust this then that.....when this spool of flux wire is out Ill spring for the Argon and co2 mix,,,,then see what happens.

Oh Weld Im not posting any picks of the welds of today...lol

Weldangrind 03-18-2012 10:16 PM
I think that you need to reverse polarity when using flux core. Perhaps your instructions will detail that.

katoranger 03-19-2012 11:21 AM
Quote:
Originally Posted by Weldangrind
I think that you need to reverse polarity when using flux core. Perhaps your instructions will detail that.
I believe so too. I checked it on my hobart to confirm it was set right. I have everything, but the bottle.

Bubbaz 03-25-2012 07:49 PM
Hey Guys Got the welder out today....and played with it some more...I found out that i needed to crank up the amps.....now splattering some good puddles and sticking metal....

Bubbaz 06-20-2012 12:21 AM
Just To let everybody know the Yamoto is still holding up and running fine.....thanks for your help....Bubba

Weldangrind 06-20-2012 01:33 AM
Glad to hear it! Any new pics?

Bubbaz 06-20-2012 03:48 PM
http://i1214.photobucket.com/albums/...ingChelsey.jpg

Here the upcoming Mrs.Bubba,, and I....yes we r getting Married July 28th....are assisting one of our friends out of a mudd hole..

http://i1214.photobucket.com/albums/...ashing2012.jpg

And me making a splash with the 250x...Sorry the Yamoto didnt make this trip...It will soon my daughter is itching for a muddy mess...lol

FastDoc 06-20-2012 04:14 PM
If a person was to grade mud, that would receive an A+. :lol:

Weldangrind 06-20-2012 09:57 PM
Thanks for the pics, and congrats and best wishes on July 28! :D

Bubbaz 08-31-2012 10:11 PM
http://i1214.photobucket.com/albums/...z43/july28.jpg

JULY 28th

http://i1214.photobucket.com/albums/...llieyamoto.jpg

Yamoto is still motovating

http://i1214.photobucket.com/albums/...43/yamoto2.jpg

Tough atv.......transmission fix still working

Bubbaz 08-31-2012 10:18 PM
Sorry for not posting in a while....lets see,,,well the wedding and back surgery has kept me from riding and Golf has taken up much of my time in August, my team is 136 wins 9 losses and 1 tie....we r kicking some butts...we r AA and only have been beaten by AAA a teams..I see a State championship in the future....oh I also fixed my blinker on the DR650 this eve...rebuilt it for $4.00 instead of a $75.00 replacement....
I hope you guys r doing fine...

Bubbaz 08-31-2012 10:20 PM
Oh weld,,,,,reverse is working fine now that my back is fixed....lol


All times are GMT -4. The time now is 12:19 AM.
Page 4 of 6 « First 23 4 56
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.