Regarding the petcock positions. Dot is closed, and either R position can be used as "run". When/if you start to run out of gas, switch to the other "R"for reserve. You will get another 10 miles, at least. You are using the gas left in the other tank lobe as reserve.

It works!

Wiring diagrams brake light issue!!
 

I have a question maybe somebody can help.

We have a 2023 Templer X pro 250 Enduro and the bike did not come with any wiring diagrams or schematics.

I’m having a problem with the rear brake light.

It will not come on when you apply the brakes but I do have a running light, and when I do switch the leads. The brown and the green in the yellow the brake light will work, but I have no running light.

Has anybody had this issue???

Help please!!!

You will find several mentions of the same issue here and a few vids on YouTube. The solder joint has popped loose inside the tailight. You can either open the tailight and repair it or replace it. If you replace it be sure to silicone where the wires go into the light to absorb the vibration and prevent it happening again.

how do you remove the adjustment screw covering