ChinaRiders Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

ChinaRiders Forums (http://www.chinariders.net/index.php)
-   Zongshen RX3 (http://www.chinariders.net/forumdisplay.php?f=136)
-   -   Suggestions for the 2017 RX3 (http://www.chinariders.net/showthread.php?t=17433)

rojo_grande 09-12-2016 09:29 PM
1 Attachment(s)
Quote:
Originally Posted by BlackBike (Post 230998)
He was being facetious, we all want a rx3 styled bike that will run at expressway speeds and also climb mountain roads. Hopefully its on the horizon for the rx4 450cc 45 hp - ideal duel sport motorcycle. (Would be just about correct power to weight balance)

Attachment 7306
Really like the looks of that bike. I think Joe B. at CSC has mentioned that the RX4 is a couple years out.

Rojo

2LZ 09-13-2016 09:44 AM
Quote:
Originally Posted by rojo_grande (Post 231024)
Really like the looks of that bike. I think Joe B. at CSC has mentioned that the RX4 is a couple years out.

Rojo
Heck! I'll just take the floating front rotor off of it! That would fix every front brake ill we have!

pyoungbl 09-13-2016 01:21 PM
Quote:
Originally Posted by detours (Post 230677)
I thought I'd post some suggestions for the 2017 model RX3
  • Change the front frame crossbar from square to round ... to allow the CSC skidplate to rotate without removal during oil changes.

How would you improve the 2017 model?
I just changed the oil on my '16 model and that crossbar is round on mine. I never noticed that before. Still cannot rotate the skidplate because the downtubes get in the way. A little work with my bandsaw might correct that problem!

pyoungbl 09-14-2016 10:10 AM
On the photo the BlackBike posted...I assume that is the 450 mule....note that the front brake is also radially mounted. That being the case I suspect the bike will have a number of subtle improvements that really do not run the manufacturing cost up much but make for a better machine. We already have a list of such 'improvements'. Now I really want to see that 450!


All times are GMT -4. The time now is 07:25 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.