| Desuboi941 |
06-15-2023 09:41 AM |
Quote:
Originally Posted by AresROC
(Post 291515)
Took the bike out for some top speed flat out runs.
Seemingly after the bike ran over some dirt/rocks, bike is making a rattling/grinding noise. Video: https://youtu.be/aQmU0q0np4Y
I parked the bike and checked for loose bolts. All were tight except the exhaust header can be tightened a bit more.
Rev the engine in neutral and the noise seems to be coming from the engine. Sounded as if a rock was inside, but it was not making the noise all the time, and from time to time the noise sounded really bad as if something is grinding.
I also noticed the valve noise is getting louder with its ticks.
Anyone have any idea what is causing the noise from an engine with 30 miles on it??? :hmm:
This is when the noise started: https://youtu.be/DAdwMbX7NXc
|
LMK
Hey man, my hawk is making he same noise, only on wot in high revs or at max speed. When I go 50, it starts buzzing or grinding whatever, with the more I push it, the more and harder it buzzes. If I go up to 60, the bike will do fine, as I give it more the speedometer starts going down but I feel as if I'm going the same speed. I dide use synthetic to run it twice but I didn't ride on it. I've been using t4 or t6 10-40 or 15-40 ever since. It runs smooth down low. There's a slight inconsistency in the idle, but it sounds good. I was thinking it might be my speedo cable. Bit idk I'm hoping it's not too engine. Have you found out what it was? |
