current shipping conditions?
In what condition are current Templar X shipping containers arriving?
Earlier, it looked like some R&L shipping employees were fond of damaging the shipping containers. Has that been rectified? Does Amazon use a different shipper for XPro fulfillment than R&L shipping? ... or are Amazon orders drop-shipped from XPro, using R&L shipping, as usual/before? |
Quote:
|
Mine made it from TX to NY as well without damage. It was R&L. This was last June.
|
??? Templar X specifications ???
Approximately how many rpm is the Templar X turning at 60 mph, using stock/oem sprockets? ... maybe 30 mph (in top gear), if it won't get to 60 mph on the stock/oem sprockets.
What is the Templar X front/rear suspension travel? ... maybe just measure the chrome portion of the forks? Thanks in advance ... |
60mph is roughly 6500rpm and the bike tops out at about 73 with stock gearing. It will cruise happily at 60 but anything more and it's screaming. Suspension travel seems to be about 11.5 inches measuring to the dust ring on the tubes.
Quote:
|
Quote:
I've noticed that many trail/dirt bikes seem to be geared for about +/- 8,000 rpm @ 60 mph ... whereas dual-sports seem closer to +/- 6,000 rpm @ 60 mph. 11.5 inches suspension travel seem more like a trail/dirt bike; the popular dual-sports seem to offer ~7 - 10 inches. Your measurements suggest something of a dual-sport/trail hybrid; interesting ... |
I take mine as being an enduro with some street-legal stuff tacked onto it.
|
My 2023 Templar X has 13/49 gears and 50 mph has it screaming along @ ~8.5-9k RPM.
I have a 40T rear to try, but I am on the dirt 90% of the time,so haven't done it yet. |
Adjustable advance CDI -DC or AC type
Has anyone tried the Leaping Knight 9 degree adjustable advance DC CDI unit. It is DC type CDI and probably works on the 6 speed Templar X.
I have an AC type CDI unit on my 5 speed, and the Naraku unit with the tiny flathead adjuster works great, but I don't know how advanced it is (continuous adjustment). Either of these might work on your bike. You can check/verify which type your bike has. It's described in the Templar resource guide on post #9. If you get 12V power at the box when you turn the ignition to on position, you have a DC CDI. |
I had 2 templar 250 X delivered via R&L from Powersportsmax in mid Nov 2023. They both arrived in pretty great shape both connected to the same pallet. The wooden pallet they arrived on was pretty trashed but mostly intact and I was pleased to find no damage issues to speak of with the crates they were packaged in or with the bikes themselves but they only shipped from a warehouse in Texas to my location in Central Arkansas.
You can see a few pictures of the crate condition here: https://www.chinariders.net/showthre...810#post402810 |
So I recently switched to an o-ring chain, it certainly felt heavier than the stock chain. The bike seems slower, guessing the heavier chain is robbing some of those limited horses.
|
O'ring chain will rob power compare to standard link...but it should break in after awhile.
If top speed is important probably not worth it over the maintenance savings. |
I'm going to look for a decent quality non o-ring and save this one as a backup. Just too much power loss and yes top speed was off dramatically (65-66 vs 73).
Quote:
|
I use a non-o ring chain. There is lots of friction in flexing an o ring chain. And standard chains are not expensive anyway. 20 hp isn't much. I need as much as I can transfer to the rear wheel!
|
I totally agree with Thumper,no o ring chain for me. Cheap bike cheap chain,makes since for me.
|
All times are GMT -4. The time now is 06:54 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.