Hi Spud my name is Louis and iam new to the forum. I own a ZongShen 200GY-2. i fixed the carburetor because the engine was not performing when i eventually managed to fix it the bike started right up. Long story short i switched the bike off 2days later go back wanting to start it and its dead. Checked for spark and nothing. I then went straight to stator cover side took it off and saw that the stator was shaving against the magneto causing the Source coil to burn.

I had it rewired and expected that once fitted the bike would start and still nothing. I did not suspect the CDI would be faulty as it was working but now i seem to think it is that. Ive tested the stator ohms is 1.4 per wire the resistance in the rewired source is very high though being 820ohms and the Pulsar coil is about 680 Ohms. Ive checked all the ground wires. Now the bike i tested the ignition coil and rectifier on is sold so i cannot test the CDI on it.

Could you please give me some advise