Help me identify my make and model?

jimbojonesn · 06-21-2021, 08:32 PM

I have good running 125cc shaft-drive, and have no idea what the make and model of the motor is. My problem is that it leaks oil quite a bit from the case

(I think) and I want to be sure of which gasket kit to get, or if it's not worth it at all, and I should just buy a new motor? Reverse is also broken somehow.

dugndeep · 06-23-2021, 07:35 AM

I seen this somewhere-152 is 125 cc horizontal engine (Honda Cub type)

dugndeep · 06-23-2021, 08:31 AM

I would definitely want to have reverse,but that could just be a $10? gear.Since your having to tear the engine apart to to replace the case gasket???
But if you deem the 4 wheeler worthy of a new engine,you could go that route.???

david3921 · 06-23-2021, 11:18 AM

According to Human Being (an expert here), the ATV was manufactured by Dajiang Motor. Reading the rest of the code says that it's a 110cc.

As for replacing the motor, a drive shaft one is going to be hard to find as most, if not all, replacement motors have sprockets. Converting over to chain driven will involve replacing everything rear of the motor.

IMO, best bet is repair as suggested by dugndeep.

jimbojonesn · 06-23-2021, 01:27 PM

Thanks all, I think my reverse is just broken from the outside, there's some kind of cable attached to the motor that is broken.

Guess I will get a couple gasket kits and go to town! Does anyone know where I could find some torque specs when I put this back together?

franque · 06-23-2021, 03:54 PM

Just find a CT 110 manual online and the specs should be close enough.

06-23-2021, 11:18 AM	#4
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,031	According to Human Being (an expert here), the ATV was manufactured by Dajiang Motor. Reading the rest of the code says that it's a 110cc. As for replacing the motor, a drive shaft one is going to be hard to find as most, if not all, replacement motors have sprockets. Converting over to chain driven will involve replacing everything rear of the motor. IMO, best bet is repair as suggested by dugndeep. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

06-23-2021, 01:27 PM	#5
jimbojonesn Join Date: Jun 2021 Location: Oceanside, CA Posts: 6	Thanks all, I think my reverse is just broken from the outside, there's some kind of cable attached to the motor that is broken. Guess I will get a couple gasket kits and go to town! Does anyone know where I could find some torque specs when I put this back together? Last edited by jimbojonesn; 06-23-2021 at 01:29 PM. Reason: added question
	0

06-23-2021, 07:35 AM	#2
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 431	I seen this somewhere-152 is 125 cc horizontal engine (Honda Cub type)
	0

06-23-2021, 08:31 AM	#3
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 431	I would definitely want to have reverse,but that could just be a $10? gear.Since your having to tear the engine apart to to replace the case gasket??? But if you deem the 4 wheeler worthy of a new engine,you could go that route.???
	0

06-23-2021, 03:54 PM	#6
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Just find a CT 110 manual online and the specs should be close enough.
	0