anthonyfa18's gy6 carb on beast 200cc and updats - Page 10

northerndad · 08-03-2011, 03:11 AM

Awesome upgrades anthony! I just ordered a Gio Beast Limited, and am looking forward to doing some of these mods. I also have a Tao with a Gy6 engine in it, no mods yet. Keep it up!

anthonyfa18 · 08-04-2011, 10:33 PM

thank you sorry a lot of shit happend to me so i put my atv on hold for a bit but i wil try to give u some more info on my new carb and intake, it on the bike but i still did not tune the carb and test the bike

onece all the shit is gone i will get back to my beast??

anthonyfa18 · 08-13-2011, 03:56 AM

:twisted: UPDATE :twisted:

i got my bike back, after put thing the 250cc 30mm gy6 carb on i could not get it to run, it was always to rich. so i brought my bike to a bike shop and he fix me up, i got re jet to 98 main and wow i can lift in 3 gear. he also replace my uni air filter with a mpr intake and filter . photo will be posted soon.

ps: my front brakes are at 25%, so any of you guys know what gio can i take the front disk brakes from?? 125cc t2??? 2010 beast??? 200cc t3?? gio lambo 150cc ???

and i am look for a 250 motor to build as my back up

Weldangrind · 08-13-2011, 12:42 PM

Anthony, can you please remind us of where you found the 250 GY6 carb? Do you have a link?

anthonyfa18 · 08-13-2011, 08:03 PM

Quote:

Originally Posted by Weldangrind

Anthony, can you please remind us of where you found the 250 GY6 carb? Do you have a link?

here you go http://www.pccmotor.com/250cc-carbur...-25025011.html

fast shipping too

anthonyfa18 · 08-14-2011, 06:34 PM

here are the pic of my 250cc gy6 carb, custom intake, mpr 90 filter intake

anthonyfa18 · 08-21-2011, 01:04 PM

:twisted: Update :twisted:

today i finish my front bumber. i took the stock one cut out that gay grill and sanded, primer and use 3m black rubberizer undercoating (p/n 08883) it look sick :P here are the photos let me know what u think

TACyJAC1999 · 08-21-2011, 03:07 PM

Nice job on the bumper Anthony!!!!

Thats one thing i need to do on my atv, is fix the front bumper. Mine is a little norrow bumper about the same width as the frame at the point of connection. I might just make a new one Im not sure yet!!!

anthonyfa18 · 09-14-2011, 10:06 PM

:twisted: Update :twisted:

so now that my beast is running with my 30mm 250cc gy6 carb i find that my 125cc dirt bike muffler is a bit to loud so i add a spark arrester for a trx 650 (03-05). the honda part number: 18317-hn8-000. it help to cut the sound but it is still loud. here are the photos

also i found out all the info about my carb, it not only from a 250cc gy6 but from a honda cn250 scooter

08-03-2011, 03:11 AM	#136
northerndad Join Date: Jul 2011 Location: Hazelton, BC, Canada Posts: 109	Very Cool Awesome upgrades anthony! I just ordered a Gio Beast Limited, and am looking forward to doing some of these mods. I also have a Tao with a Gy6 engine in it, no mods yet. Keep it up!
	0

08-04-2011, 10:33 PM	#137
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	thank you sorry a lot of shit happend to me so i put my atv on hold for a bit but i wil try to give u some more info on my new carb and intake, it on the bike but i still did not tune the carb and test the bike onece all the shit is gone i will get back to my beast?? __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

08-13-2011, 03:56 AM	#138
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	:twisted: UPDATE :twisted: i got my bike back, after put thing the 250cc 30mm gy6 carb on i could not get it to run, it was always to rich. so i brought my bike to a bike shop and he fix me up, i got re jet to 98 main and wow i can lift in 3 gear. he also replace my uni air filter with a mpr intake and filter . photo will be posted soon. ps: my front brakes are at 25%, so any of you guys know what gio can i take the front disk brakes from?? 125cc t2??? 2010 beast??? 200cc t3?? gio lambo 150cc ??? and i am look for a 250 motor to build as my back up __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

08-13-2011, 12:42 PM	#139
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Anthony, can you please remind us of where you found the 250 GY6 carb? Do you have a link? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-14-2011, 06:34 PM	#141
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	here are the pic of my 250cc gy6 carb, custom intake, mpr 90 filter intake __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

08-21-2011, 01:04 PM	#142
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	:twisted: Update :twisted: today i finish my front bumber. i took the stock one cut out that gay grill and sanded, primer and use 3m black rubberizer undercoating (p/n 08883) it look sick :P here are the photos let me know what u think __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

08-21-2011, 03:07 PM	#143
TACyJAC1999 Join Date: Jul 2011 Posts: 36	Nice job on the bumper Anthony!!!! Thats one thing i need to do on my atv, is fix the front bumper. Mine is a little norrow bumper about the same width as the frame at the point of connection. I might just make a new one Im not sure yet!!!
	0

09-14-2011, 10:06 PM	#144
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	:twisted: Update :twisted: so now that my beast is running with my 30mm 250cc gy6 carb i find that my 125cc dirt bike muffler is a bit to loud so i add a spark arrester for a trx 650 (03-05). the honda part number: 18317-hn8-000. it help to cut the sound but it is still loud. here are the photos also i found out all the info about my carb, it not only from a 250cc gy6 but from a honda cn250 scooter __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0