2022 Icebear Champion 125 , green , in CT - Page 2

RTSE176 · 09-07-2022, 07:06 PM

Throwing it out there in case anyone wants one .
Basically new with 51 miles ( will go up as I ride ) . Already did the 2 known essential upgrade / fixes , the carburetor and Delrin rear swing arm bushings .
Runs absolutely awesome now with the VM26 carb , starts right up even without the choke !!!
Rear swing arm tight like a drum now !!! NO wiggle !!!
Also has fuel filters in both gas lines .
The factory oil has been out since day one and replaced with quality oil .
The honest reason for sale is I am used to driving manual clutch motorcycles , so the semi auto is awkward for me .
The bike also will come with new , not installed Shinko SR426 120/90/10 tires and new tubes , and the "Honda " decal for the tank to really complete that CT70 clone !!!
Here is the breakdown of what I have total into the bike :
1) Bike - $1,850 ( extra freight surcharge and assembled , bought it local like this )
2) Carb - $60
3) Bushings $20
4) Tires - $135
5) Tubes $25
6) Decal - $15
For a total of $2,105 . Yes , I know you see them for $1,499 , but if you are on the East Coast you will pay another $100 for the freight surcharge ,
NTM Cajun shows late Oct / early Nov for these . You can have it now , assembled , shake down miles that shows you got a good one , no risk of coming in damaged / won't run , known issues done , and the cool extra parts .
$1,750
I'm torn cause I really do like it but could care either way if I sell it .
Pics to follow .

09-07-2022, 07:06 PM	#1
RTSE176 Join Date: Aug 2022 Posts: 30	2022 Icebear Champion 125 , green , in CT Throwing it out there in case anyone wants one . Basically new with 51 miles ( will go up as I ride ) . Already did the 2 known essential upgrade / fixes , the carburetor and Delrin rear swing arm bushings . Runs absolutely awesome now with the VM26 carb , starts right up even without the choke !!! Rear swing arm tight like a drum now !!! NO wiggle !!! Also has fuel filters in both gas lines . The factory oil has been out since day one and replaced with quality oil . The honest reason for sale is I am used to driving manual clutch motorcycles , so the semi auto is awkward for me . The bike also will come with new , not installed Shinko SR426 120/90/10 tires and new tubes , and the "Honda " decal for the tank to really complete that CT70 clone !!! Here is the breakdown of what I have total into the bike : 1) Bike - $1,850 ( extra freight surcharge and assembled , bought it local like this ) 2) Carb - $60 3) Bushings $20 4) Tires - $135 5) Tubes $25 6) Decal - $15 For a total of $2,105 . Yes , I know you see them for $1,499 , but if you are on the East Coast you will pay another $100 for the freight surcharge , NTM Cajun shows late Oct / early Nov for these . You can have it now , assembled , shake down miles that shows you got a good one , no risk of coming in damaged / won't run , known issues done , and the cool extra parts . $1,750 I'm torn cause I really do like it but could care either way if I sell it . Pics to follow . Last edited by RTSE176; 10-01-2022 at 10:02 AM.
	1