2006 xranger 200 wiring an issue

disturbed · 11-20-2016, 05:19 PM

I just bought a 2006 xranger 200 for $120 I have it all apart wiring is butchered cdi missing an cdi plug missing does anybody know a way I ran use a 5 pin cdi

humanbeing · 11-20-2016, 05:38 PM

Any pic?
From http://www.chinariders.net/showthread.php?t=10919 we know it's a Zongshen Sierra http://www.chinariders.net/showthread.php?t=6051

disturbed · 11-21-2016, 12:25 AM

This is whats left of electrical system

humanbeing · 11-21-2016, 12:42 AM

http://www.chinariders.net/showthread.php?t=13934 worth reading
---
Yamaha SR150: http://sanxin.com.cn/Exhibit/exhview.asp?pid=19
Typical small horizontal 5-pin: http://sanxin.com.cn/Exhibit/exhview.asp?pid=1
---
TW200 jammed to CG (square connector) ac-CDI
Similar hack job done on a Yamaha scooter / GY6 DC-CDI (easier)
http://www.chyangwa.net/forum.php?mo...authorid=75082
Anyways these hack job doesn't works perfect (the curve is different from stock...) !!!

disturbed · 11-22-2016, 01:06 PM

well I ran into a bit of luck found a full 2006 zongshen lzx200 gy2 harness loom for $22 an the cdi for $15 just have to wait until I receive it then ill update

**JerryHawk250** · 11-22-2016, 01:09 PM

Quote:

Originally Posted by disturbed

well I ran into a bit of luck found a full 2006 zongshen lzx200 gy2 harness loom for $22 an the cdi for $15 just have to wait until I receive it then ill update

Good deal! Be sure to keep us posted and of course lots of pictures.

I'll follow this one to see the progress.

disturbed · 11-22-2016, 01:33 PM

if I had the title I would be doing a full restore but I only have bill of sale so I cant get title in nj

**JerryHawk250** · 11-22-2016, 01:39 PM

Quote:

Originally Posted by disturbed

if I had the title I would be doing a full restore but I only have bill of sale so I cant get title in nj

Just bringing it back to life is a restore. lol It will still make a nice off road bike.

disturbed · 11-22-2016, 01:51 PM

indeed but I would have loved to make it back to factory all new plastics battery lights speedo an put it on the road but since no title I'm not going to put that much money into It going to make it a woods bike

pistolclass · 11-22-2016, 03:16 PM

Do the vt trick.

disturbed · 11-22-2016, 06:14 PM

whats vt trick

pistolclass · 11-22-2016, 06:50 PM

Try this:

http://www.chinonthetank.com/2014/04...-registration/

pistolclass · 11-23-2016, 10:40 AM

Hey disturbed, think the VT trick will work in NJ?

Weldangrind · 11-23-2016, 11:50 AM

I would certainly try it. At the very least, you can ride around with VT plates for awhile.

Weldangrind · 11-23-2016, 11:51 AM

Here's the China Rider thread on it: http://www.chinariders.net/showthread.php?t=12368

11-20-2016, 05:19 PM	#1
disturbed Join Date: Nov 2016 Posts: 19	2006 xranger 200 wiring an issue I just bought a 2006 xranger 200 for $120 I have it all apart wiring is butchered cdi missing an cdi plug missing does anybody know a way I ran use a 5 pin cdi
	0

11-20-2016, 05:38 PM	#2
humanbeing Join Date: Mar 2008 Posts: 2,436	Any pic? From http://www.chinariders.net/showthread.php?t=10919 we know it's a Zongshen Sierra http://www.chinariders.net/showthread.php?t=6051 __________________
	0

11-21-2016, 12:42 AM	#4
humanbeing Join Date: Mar 2008 Posts: 2,436	http://www.chinariders.net/showthread.php?t=13934 worth reading --- Yamaha SR150: http://sanxin.com.cn/Exhibit/exhview.asp?pid=19 Typical small horizontal 5-pin: http://sanxin.com.cn/Exhibit/exhview.asp?pid=1 --- TW200 jammed to CG (square connector) ac-CDI Similar hack job done on a Yamaha scooter / GY6 DC-CDI (easier) http://www.chyangwa.net/forum.php?mo...authorid=75082 *Anyways these hack job* doesn't works perfect (the curve is different from stock...) !!!** __________________ Last edited by humanbeing; 11-21-2016 at 04:41 AM.
	1

11-23-2016, 11:50 AM	#14
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I would certainly try it. At the very least, you can ride around with VT plates for awhile. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-23-2016, 11:51 AM	#15
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Here's the China Rider thread on it: http://www.chinariders.net/showthread.php?t=12368 __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-22-2016, 01:06 PM	#5
disturbed Join Date: Nov 2016 Posts: 19	well I ran into a bit of luck found a full 2006 zongshen lzx200 gy2 harness loom for $22 an the cdi for $15 just have to wait until I receive it then ill update
	0

11-22-2016, 01:33 PM	#7
disturbed Join Date: Nov 2016 Posts: 19	if I had the title I would be doing a full restore but I only have bill of sale so I cant get title in nj
	0

11-22-2016, 01:51 PM	#9
disturbed Join Date: Nov 2016 Posts: 19	indeed but I would have loved to make it back to factory all new plastics battery lights speedo an put it on the road but since no title I'm not going to put that much money into It going to make it a woods bike
	0

11-22-2016, 03:16 PM	#10
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Do the vt trick.
	0

11-22-2016, 06:14 PM	#11
disturbed Join Date: Nov 2016 Posts: 19	whats vt trick
	0

11-22-2016, 06:50 PM	#12
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Try this: http://www.chinonthetank.com/2014/04...-registration/
	0

11-23-2016, 10:40 AM	#13
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Hey disturbed, think the VT trick will work in NJ?
	0