Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 12-23-2018, 09:50 AM   #1
willy dog   willy dog is offline
 
willy dog's Avatar
 
Join Date: Oct 2015
Location: vermont
Posts: 238
around here the mighty zong sees mostly dirt roads i found the front 14t a little high in 3rd gear and to low in second the 13t fits my needs perfect when it starts to get tired will look into 300 kit but right now i love it
__________________
Peace and Zong Life


 
Reply With Quote
Old 12-25-2018, 08:59 PM   #2
sqwert   sqwert is offline
 
Join Date: Jun 2017
Posts: 382
13t is at least 8% reduction in sprocket and chain lives compared to 14t. Best to run the biggest countershaft sprocket you can, then choose a wheel sprocket to provide the final drive ratio you desire. Select a high quality ringed chain to maximize lives of all three components. Lube enough to prevent surface rust and you can reasonably expect 25,000 miles (40,000km) out of a chain and sprocket set. Typically, largest countershaft sprocket that will fit and appropriate chain and wheel sprocket to match will need lube twice while traveling the same distance that will flat wear out smaller sprockets and a cheap chain, sets I've worn out in 5000 miles (8000km).

Chains and sprockets wear to fit each other. A worn one of the three parts, doesn't matter which, and very quickly all 3 will be worn. To maximize chain and sprocket life replace all three parts at the same time.

Anywho, RX3 trans ratios are too close together for an adventure bike that needs to run terrain and highway. Much of the improved powerband width of the 300 kit is simply wasted. Of course, if you want to tweek the stock displacement for more power peak and a narrower powerband the ratios are just about perfect. I have 4 TW200 Yamahas, modified for different purposes, and they have 3 different sets of transmission ratios, so I know how critical trans ratios can be to the overall performance attributes ratios can provide.

Wish I could get tooth counts on all the RX3 trans gears so I can get started on the math to calculate an appropriate set of ratios for a stock engine with the 300 kit for adventure use. Once such an engine is built anyone who rides it will have orgasms from the much improved feel.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:28 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.