Confirming Rear Tube Size

Ski_rush · 03-20-2017, 02:01 PM

I went for a pretty short spin in the neighborhood. Got home and realized the rear tire was flat. Fired up my air compressor...no change to tire pressure. I don't notice anything like a nail sticking out of the tire, or any hole.

I was thinking I might need a new rear tube. Is this the right size?

https://www.amazon.com/Kenda-05185720-510-18-100-18-Motorcycle/dp/B000WJJ7Y4/ref=pd_sim_293_2?_encoding=UTF8&pd_rd_i=B000WJJ7Y4 &pd_rd_r=REFWARMSNSAEFKHFCP0X&pd_rd_w=QSyWO&pd_rd_ wg=vUCQL&psc=1&refRID=REFWARMSNSAEFKHFCP0X

Ariel Red Hunter · 03-20-2017, 02:24 PM

Quote:

Originally Posted by Ski_rush

I went for a pretty short spin in the neighborhood. Got home and realized the rear tire was flat. Fired up my air compressor...no change to tire pressure. I don't notice anything like a nail sticking out of the tire, or any hole.

I was thinking I might need a new rear tube. Is this the right size?

https://www.amazon.com/Kenda-0518572...MSNSAEFKHFCP0X

No. You want a 3.50 - 4.10 tube if your rear tire is a 4.10, or the metric equivilent. When you break the tire down look for what the tube is chafing on. Oh, by the way, did you check whether the valve stem is screwed all the way in? Perhaps you will be able to patch the tube until you can get a new one. Look into heavy duty tubes....ARH

**JerryHawk250** · 03-20-2017, 02:58 PM

Buy the rim strip while your at it. This will help protect the tube.

Ski_rush · 03-20-2017, 03:13 PM

Quote:

Originally Posted by JerryHawk250

Buy the rim strip while your at it. This will help protect the tube.

Will do...bummer that I'm out of commission

Calling for snow again tomorrow too, so maybe it's not so bad. I'm not psyched about having to pull the rear tire off. Should change the chain while I'm at it, or will that be opening a can of worms?

**JerryHawk250** · 03-20-2017, 03:39 PM

Quote:

Originally Posted by Ski_rush

Will do...bummer that I'm out of commission

Calling for snow again tomorrow too, so maybe it's not so bad. I'm not psyched about having to pull the rear tire off. Should change the chain while I'm at it, or will that be opening a can of worms?

I just rolled over a 1000 miles on mine over the weekend. The thought of all these flats lately kind of has me worried thinking I need to pull and check my tubes. yes it was a nice weekend for riding. Too bad you didn't get much riding in. But you know who put in over 225 miles this weekend? This Guy

I know that was just rude.

oldscooter · 03-20-2017, 11:48 PM

I think that bicycle rim cloth tape would work on our rims. I liked it much better than the rubber strips. The valve hole is less likely to break with the tape and the adhesive holds it in place. When/if I ever use it I'll report in.

pete · 03-21-2017, 02:26 AM

Quote:

Originally Posted by JerryHawk250

Buy the rim strip while your at it. This will help protect the tube.

go around 3 or 4 times with 50mm /2" duct tape...

...

**JerryHawk250** · 03-21-2017, 06:37 AM

Well Ski_rush put the jinx on me. When I got home last night I was going to take a ride. I went to pull the bike out and that rear tire was flat

. I guess I deserve it for making fun at him. Lol I'll have to order a tube and tire spoons. I thought about what Pete said and might just wrap with gorilla tape.

LunaTech · 03-21-2017, 07:29 AM

Here is a good site I found with a chart for what size tubes fit what size tires.
http://www.cb450stuff.com/tires/

**JerryHawk250** · 03-21-2017, 08:25 AM

I just ordered Tube and Tire Spoons from Amazon and used the Chinariders Link Program at the bottom of the page.

I've been riding over 40 years and this will be the first flat I ever got.

Ariel Red Hunter · 03-21-2017, 08:59 AM

Quote:

Originally Posted by JerryHawk250

I just ordered Tube and Tire Spoons from Amazon and used the Chinariders Link Program at the bottom of the page.

I've been riding over 40 years and this will be the first flat I ever got.

Good that you ordered a new tube. The tubes that come on China Bikes are not very good. Make sure that the spokes are snug, then take out the rim strip and feel to make sure no sharp ends of the spokes are coning through the nipples. File them smooth if necessary. Gorilla Tape has been used sucessfully in stead of rim strips...ARH

**JerryHawk250** · 03-23-2017, 11:16 AM

Tube and Spoons out for delivery today.

To bad I won't be able to do anything till Saturday. They give 70% chance of rain Saturday anyway so it will give me a chance to change the tube and do a much needed oil change for Sunday. Should be clear and warm.

Ski_rush · 03-23-2017, 11:25 AM

Quote:

Originally Posted by JerryHawk250

Tube and Spoons out for delivery today.

To bad I won't be able to do anything till Saturday. They give 70% chance of rain Saturday anyway so it will give me a chance to change the tube and do a much needed oil change for Sunday. Should be clear and warm.

All of my parts should arrive today, including a new tube, spoons, etc. I hope to have some time tomorrow night to install it...I might be messaging you...I've never done this before.

**JerryHawk250** · 03-23-2017, 11:39 AM

Quote:

Originally Posted by Ski_rush

All of my parts should arrive today, including a new tube, spoons, etc. I hope to have some time tomorrow night to install it...I might be messaging you...I've never done this before.

I've been riding over 40 years and this will be the first flat I ever had. I'll just have to think of it as an oversized bicycle tire. lol

oldscooter · 03-23-2017, 12:23 PM

I like to cover my tubes with talc (baby powder). Just slop it on and rub it all over. Makes tube install much more gooder.

03-20-2017, 02:01 PM	#1
Ski_rush Join Date: Feb 2017 Posts: 449	Confirming Rear Tube Size I went for a pretty short spin in the neighborhood. Got home and realized the rear tire was flat. Fired up my air compressor...no change to tire pressure. I don't notice anything like a nail sticking out of the tire, or any hole. I was thinking I might need a new rear tube. Is this the right size? https://www.amazon.com/Kenda-05185720-510-18-100-18-Motorcycle/dp/B000WJJ7Y4/ref=pd_sim_293_2?_encoding=UTF8&pd_rd_i=B000WJJ7Y4 &pd_rd_r=REFWARMSNSAEFKHFCP0X&pd_rd_w=QSyWO&pd_rd_ wg=vUCQL&psc=1&refRID=REFWARMSNSAEFKHFCP0X
	0

03-20-2017, 02:58 PM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,556	Buy the rim strip while your at it. This will help protect the tube. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

03-20-2017, 11:48 PM	#6
oldscooter Join Date: Feb 2017 Location: North Alabama Posts: 62	I think that bicycle rim cloth tape would work on our rims. I liked it much better than the rubber strips. The valve hole is less likely to break with the tape and the adhesive holds it in place. When/if I ever use it I'll report in. __________________ 2002 Goldwing 2016 Hawk
	0

03-21-2017, 06:37 AM	#8
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,556	Well Ski_rush put the jinx on me. When I got home last night I was going to take a ride. I went to pull the bike out and that rear tire was flat . I guess I deserve it for making fun at him. Lol I'll have to order a tube and tire spoons. I thought about what Pete said and might just wrap with gorilla tape. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

03-21-2017, 08:25 AM	#10
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,556	I just ordered Tube and Tire Spoons from Amazon and used the Chinariders Link Program at the bottom of the page. I've been riding over 40 years and this will be the first flat I ever got. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

03-21-2017, 07:29 AM	#9
LunaTech Join Date: Jul 2016 Location: Jonesville, NC Posts: 136	Here is a good site I found with a chart for what size tubes fit what size tires. http://www.cb450stuff.com/tires/
	1

03-23-2017, 11:16 AM	#12
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,556	Tube and Spoons out for delivery today. To bad I won't be able to do anything till Saturday. They give 70% chance of rain Saturday anyway so it will give me a chance to change the tube and do a much needed oil change for Sunday. Should be clear and warm. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

03-23-2017, 12:23 PM	#15
oldscooter Join Date: Feb 2017 Location: North Alabama Posts: 62	I like to cover my tubes with talc (baby powder). Just slop it on and rub it all over. Makes tube install much more gooder. __________________ 2002 Goldwing 2016 Hawk
	0