My TaoTao Hellcat 125cc - Page 9

Lucastheking · 09-20-2018, 09:04 PM

Quote:

Originally Posted by Chinabike

Its the hose that comes out of the top of the engine. Its connected to the emissions/air box.
If you remove air box then you put the uni filter on the end of the hose that was connected to the air box.

Would take a pic for you but i'm not around my bike.

OOOHH its when it remove the airbox? thanks man i havent done that yet cause i still have the stock carb on ill do it when i change the carb then, thanks man

Chinabike · 09-21-2018, 06:56 PM

Quote:

Originally Posted by Lucastheking

OOOHH its when it remove the airbox? thanks man i havent done that yet cause i still have the stock carb on ill do it when i change the carb then, thanks man

yes only when you remove the air box, then you will have the filter on the the crank case hose.

Chinabike · 09-30-2018, 06:47 PM

Help!

I can't get me rpms higher then 6-7k topping out speed 50mph wot.
After moving from a 105 main jet to a 95 main jet. Needle clip middle.
vm22 carb

when i had a 110 main jet in it would get 58mph but would bog at 3/4 throttle

Whats should i try, think i'll try back up main jet

wlfpck · 10-02-2018, 01:41 PM

Where are you located? I'm running a 110 or 115 main.

Have you done a plug chop to see if you're lean or rich? That's probably where I'd start.

Chinabike · 10-05-2018, 07:11 PM

Quote:

Originally Posted by wlfpck

Where are you located? I'm running a 110 or 115 main.

Have you done a plug chop to see if you're lean or rich? That's probably where I'd start.

cali, yeah i was running rich at #115 #110. #105 was still a little on the rich side.
I'm running good now at #100 still need to run it some more. I think changing my pod filter mess up my tuning.

Gman828 · 10-15-2018, 03:33 PM

Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

Whisky · 10-15-2018, 06:43 PM

I found out that fine tuning the idle is best where the throttle is mounted on the handle bars. After u get it smooth there then set it on the carb. I fought a high/low/no idle for days.

Chinabike · 10-16-2018, 06:28 PM

Quote:

Originally Posted by Gman828

Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

No idle? You check the plug? rich/lean.
Upload the video to youtube and post the link.

wlfpck · 10-29-2018, 12:04 PM

Quote:

Originally Posted by Gman828

Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.

Open the carb up and check the pilot jet. If it's clogged, could be an issue.

Throw the video on youtube and post the link.

09-30-2018, 06:47 PM	#123
Chinabike Join Date: Jan 2018 Posts: 361	Help! I can't get me rpms higher then 6-7k topping out speed 50mph wot. After moving from a 105 main jet to a 95 main jet. Needle clip middle. vm22 carb when i had a 110 main jet in it would get 58mph but would bog at 3/4 throttle Whats should i try, think i'll try back up main jet Last edited by Chinabike; 09-30-2018 at 10:56 PM.
	0

10-02-2018, 01:41 PM	#124
wlfpck Join Date: Mar 2018 Posts: 249	Where are you located? I'm running a 110 or 115 main. Have you done a plug chop to see if you're lean or rich? That's probably where I'd start. __________________ 2020 Honda Grom 2017 Icebear Fuerza (Daix PMZ125-1) - Sold
	0

10-15-2018, 06:43 PM	#127
Whisky Join Date: Aug 2018 Posts: 286	I found out that fine tuning the idle is best where the throttle is mounted on the handle bars. After u get it smooth there then set it on the carb. I fought a high/low/no idle for days. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	1

10-15-2018, 03:33 PM	#126
Gman828 Join Date: Sep 2018 Posts: 5	Guys, had my TaoTao on the road for about 2 weeks and it has started no idling. Any idea what may be going on? Made a video to show what it was doing but can’t figure out how to upload it.
	0