Vader / Hellcat Exhaust Options

Jahunt · 08-30-2017, 10:56 PM

Hey guys, I recently purchased the TaoTao Hellcat 125 , Grom clone. It looks like the Vader exhaust exits the head at a slight rightward angle, rather than straight down like the Grom. Has anyone come up with a bolt on solution for this exhaust port setup?

Thanks!

maldoj2 · 08-31-2017, 09:51 AM

the only option is a 50cc exh. and it runsnext to your leg. you can be burn
the exh form a grom will work with a litter modification, you will have to heat it up and twist the pipe. this is my bike ( vader )

zortor · 09-01-2017, 08:48 PM

You got a hellcat? Nice. How's it been so far? Where'd you get it? How many miles have you put on it?

Jahunt · 09-02-2017, 11:19 PM

I bought it from a local NC wholesaler. I have about $150 miles so far. Tops out around 55 MPH. It is NECESSARY to replace the two motor mount bolts. The stock one cause sever vibration and the rear broke already. Asides from that, good!

zortor · 09-04-2017, 03:45 PM

What did you use to replace those mounts? Thanks

08-30-2017, 10:56 PM	#1
Jahunt Join Date: Aug 2017 Posts: 2	Vader / Hellcat Exhaust Options Hey guys, I recently purchased the TaoTao Hellcat 125 , Grom clone. It looks like the Vader exhaust exits the head at a slight rightward angle, rather than straight down like the Grom. Has anyone come up with a bolt on solution for this exhaust port setup? Thanks!
	1

09-01-2017, 08:48 PM	#3
zortor Join Date: Aug 2017 Posts: 6	You got a hellcat? Nice. How's it been so far? Where'd you get it? How many miles have you put on it?
	0

09-02-2017, 11:19 PM	#4
Jahunt Join Date: Aug 2017 Posts: 2	I bought it from a local NC wholesaler. I have about $150 miles so far. Tops out around 55 MPH. It is NECESSARY to replace the two motor mount bolts. The stock one cause sever vibration and the rear broke already. Asides from that, good!
	0

09-04-2017, 03:45 PM	#5
zortor Join Date: Aug 2017 Posts: 6	What did you use to replace those mounts? Thanks
	0