Tao Tao ATA150G stock carb

Computek · 05-27-2018, 10:56 AM

Does anyone know which carb the ATA150G actually comes with? The diagram on Partskit shows it to be a PZ27 but I thought that was a bit big for a 150. The one I have has had someone else (I assume the PO) install a PZ20 and rather than mess with that or a PZ27 I thought to go with a Mikuni VM26 if the machine can handle a carb that large.

I much prefer the Mikuni's, they are way easier to tune.

Thanks in advance!

Al · 05-27-2018, 05:28 PM

Try the pz20 and give a report.

Computek · 05-28-2018, 01:14 PM

Quote:

Originally Posted by Al

Try the pz20 and give a report.

The PZ20 as installed runs ok but the idle is wonky and takes a bit to come down when revved.

Tao Tao's Partskit.com shows a PZ27 on that bike.

So, I was wondering if anyone did a VM26 conversion on one of the 150-200 series GY6 quads

05-27-2018, 10:56 AM	#1
Computek Join Date: May 2018 Location: Central MS Posts: 29	Tao Tao ATA150G stock carb Does anyone know which carb the ATA150G actually comes with? The diagram on Partskit shows it to be a PZ27 but I thought that was a bit big for a 150. The one I have has had someone else (I assume the PO) install a PZ20 and rather than mess with that or a PZ27 I thought to go with a Mikuni VM26 if the machine can handle a carb that large. I much prefer the Mikuni's, they are way easier to tune. Thanks in advance!
	0

05-27-2018, 05:28 PM	#2
Al Join Date: Jun 2017 Posts: 73	Try the pz20 and give a report.
	0