|
04-29-2024, 01:26 PM | #1 |
Join Date: Feb 2023
Location: Upstate SC
Posts: 271
|
No.1, why would you "hacksaw" the bottom of the carb off?
No.2. I like accelerator pumps. I wonder if a PZ30 might fit a Templar X? Looks a bit on the tall side, like a Keihin. |
|
05-02-2024, 04:11 PM | #2 | |
Join Date: Aug 2020
Location: Australia
Posts: 1,282
|
Quote:
The PZ30 non pumper is a slimmer fit than a nibbi 28 and the throttle slide position is closer to the engine. The main issue with the PZ30B pumper carb is its width increase due to the pumper diaphragm actuator... The other main pain with the PZ30 is the under bowl position of the A/F screw which is a PITA... |
|
|
05-02-2024, 08:41 PM | #3 | |
Join Date: Aug 2013
Posts: 78
|
Quote:
... And why would you hacksaw the bowl off? Because if you have a newer bike, you won't be able to create a slot in the screws, without damaging the (OEM carb) bowl anyway, in such a way that it would leak. They are 3 to 4 mm deep in the bowl. |
|
|
|
|
|
|