250 Zongshen only cranks a couple of times, even when jump started. What's going on?

Adjuster · 05-19-2019, 08:12 PM

Double check all wiring make sure all connections are good, no partially broken wires and nothing pinched.

Take out spark plug and then try to start just to see if the starter is turning over the engine freely.

No kick start?

Push and dump the clutch start?

You need to get yourself one of the new small jump boxes.

/

05-19-2019, 08:12 PM	#2
Adjuster Join Date: Dec 2014 Location: Deerfield Beach FL Posts: 1,410	Double check all wiring make sure all connections are good, no partially broken wires and nothing pinched. Take out spark plug and then try to start just to see if the starter is turning over the engine freely. No kick start? Push and dump the clutch start? You need to get yourself one of the new small jump boxes. /
	0